Jump to content
SAU Community

Tips While Installing Cams + Valve Springs

Tomei_33

By Tomei_33,
in Engines & Forced Induction

 Share

Recommended Posts

Tomei_33 Rising Star

Tomei_33

Posted
Posted

Hey guys,

I'm gonna be getting new HKS cams put in soon along with HKS valve springs and retainers. Is there anything that i should do while the head is off? maybe solid lifters? or changing gaskets? Im aiming for around 350 awkw.. any help is appreciated. Thanks

btw this is on a 1990 R32 gtr thanks~!

PM-R33 Grand Master

PM-R33

Posted
Posted

If the head is off its probably worth getting it chemically cleaned in a bath just to get rid of all the carbon build up, its pretty cheap anyway. Depends how far you wanna go with modifying the head and the specs of the cams your putting in i suppose. Obviously a new head gasket is needed.

I'm kind of in a similar boat to you at the moment, changing my cams in a couple of weeks.

tacker Mentor

tacker

Posted
Posted

yer matie gtr's are a solid system, cam directly on to bucket, onto shim onto valve stem.

You could look at an oil restrictor which is put into the block to reduct the amount of oil pushed up into the head its a 5 minute job.

I have seen 3 different head in the past few weeks and all the valve guides were worn. If the valve are out you could do some porting but dont ask me how as i stuffed a head by taking to much out :-) well documented but did get the second one right

Tomei_33 Rising Star

Tomei_33

Posted
  • Author
Posted
exhaust valve guides are probably flogged out and will need replacing.

solid lifters...GTR...lol

Thanks for the info, but could u elaborate on the "solid lifter...GTR ... lol"

Im not sure what thats meant to mean lol - I read that gtrs should only change lifters if the lift is 10.25mm or above? the cams are 10.2 lift, so i wouldnt need to change the lifters would i?

Also are there other gaskets that i should change? a workshop recommended that i change rocker cover gaskets too..

tacker Mentor

tacker

Posted
Posted

gtrs are a solid lifter type system mate so dont worry about them.

10.2 mm lift will be an issue though i believe you will need to machine the head where the cam lobes rotate i think that 10.2 will touch.

Also i you may need valve springs to match the 10.2mm lift again not sure if the standard springs will cope with that lift.

think you better talk to a workshop who has done this before as you will need to check valve clearence and this can be a difficult job at the best of times.

Tomei_33 Rising Star

Tomei_33

Posted
  • Author
Posted
gtrs are a solid lifter type system mate so dont worry about them.

10.2 mm lift will be an issue though i believe you will need to machine the head where the cam lobes rotate i think that 10.2 will touch.

Also i you may need valve springs to match the 10.2mm lift again not sure if the standard springs will cope with that lift.

think you better talk to a workshop who has done this before as you will need to check valve clearence and this can be a difficult job at the best of times.

The person i got the cams off told me that they are straight fit cams, no modification required. I think i mentioned that i got valve springs, not sure if i did, but yea i got sum :P and i spoke to a workshop about it, they said a few shims will have to be swapped around and some bought, but that wont be too much trouble.. Just wanna make sure that i dont have to take the head off again.. So what gaskets should be changed will the head is off? obviously the head gasket, but any others?

rb26s13 Mentor

rb26s13

Posted
Posted (edited)
The person i got the cams off told me that they are straight fit cams, no modification required. I think i mentioned that i got valve springs, not sure if i did, but yea i got sum >_< and i spoke to a workshop about it, they said a few shims will have to be swapped around and some bought, but that wont be too much trouble.. Just wanna make sure that i dont have to take the head off again.. So what gaskets should be changed will the head is off? obviously the head gasket, but any others?

you got had.

the only bolt in cams i can think of that require nothing else to be done is pon cams

Edited by rb26s13
Tomei_33 Rising Star

Tomei_33

Posted
  • Author
Posted

hrm... does anyone know how much the standard nissan valve guides should cost? i gave them a call and they quoted me $47.45 EACH... times 24, thats $1138.80... which is ridiculous when tomei valve guides on ebay are only $525 + postage..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
×
×
  • Create New...