Jump to content
SAU Community

R34 And R33 Series 2 Owners...

RusH_

By RusH_,
in Queensland

 Share

Recommended Posts

RusH_ Veteran

RusH_

Posted
Posted (edited)

Im gonna ask a big favour here...

Would any1 with a 34gtt or series 2 r33 with rb25DET neo engines be willing to let me borrow their coil packs to see if it is my coil packs that are causing me dramas?

can do it at your place or mine... alcoholic reward perhaps?

Thanks in advance

Steve

Edited by RusH_
Link to comment
https://www.sau.com.au/forums/topic/213415-r34-and-r33-series-2-owners/
Share on other sites
  • 2 weeks later...
naomy Enthusiast

naomy

Posted
Posted

i have gtt

since i lost my job and have nothing better to do than surfing will be hapy to help u out,

since im new to skylines will be happy to ask few q.

cheers

drop pm if interested

P.S. i hope it want do anything wroong with my engine

sunnycoast Experienced

sunnycoast

Posted
Posted

Great that your helping him out Steve...But don't worry, you can't hurt your coilpacks by doing a transfer. If you lived near me (sunshine coast) I would be happy to do the work for free on the weekend.. installed probably 4 or 5 sets now on 33's and 34's, turbo's and non turbo's.

So let me know if you need any advice/help as I am more than happy to assist.

have a great day.

Chris

RusH_ Veteran

RusH_

Posted
  • Author
Posted (edited)
i have gtt

since i lost my job and have nothing better to do than surfing will be hapy to help u out,

since im new to skylines will be happy to ask few q.

cheers

drop pm if interested

P.S. i hope it want do anything wroong with my engine

Thank you very much, ill post up shortly and/or pm you if i still need to do a check

Great that your helping him out Steve...But don't worry, you can't hurt your coilpacks by doing a transfer. If you lived near me (sunshine coast) I would be happy to do the work for free on the weekend.. installed probably 4 or 5 sets now on 33's and 34's, turbo's and non turbo's.

So let me know if you need any advice/help as I am more than happy to assist.

have a great day.

Chris

Cheers chris, if i have any questions ill be sure to hit u up, and yeh i dont live very near the sunshine coast, way south as a matter of fact lol.

hey mate i have a full set of R34 GT-T coil packs let me know if u need them your welcome to try them out

Ah sweet thanks Vish, once i get a diagnostic done ill let you know if i still need them :laugh:

Edited by RusH_
666DAN Grand Master

666DAN

Posted
Posted

Mate, it's your coil packs...if it's throwing up the error code and running like shit don't go through the pain of changing them over to find it is them (which you already knew), then having to replace them with splitfires as well.

Just get the splitfires and be happy :laugh:

RusH_ Veteran

RusH_

Posted
  • Author
Posted
Mate, it's your coil packs...if it's throwing up the error code and running like shit don't go through the pain of changing them over to find it is them (which you already knew), then having to replace them with splitfires as well.

Just get the splitfires and be happy :laugh:

What error code might that be Dan?

53XYN Veteran

53XYN

Posted
Posted

i had the probs your having the stock coil packs start to break im unsure of error codes but ur free to try them out whenever you want bud .. i wouldnt waste too much money finding the faults get a multi meter and test the coils yourself save some $$ in the end too

Pm me whenever you want em bud :P more then happy to help out

RusH_ Veteran

RusH_

Posted
  • Author
Posted

would u believe im eatin kfc as i read this topic? lol

thanks vish, see u then,

also thanks for that document dan, only without sounding too dumb, its a tad confusing, at any rate ill test out these coil packs and see if it solves my issue

666DAN Grand Master

666DAN

Posted
Posted

It may read a bit intense but basically, turn the car to On (don't start)...short out the two consult pins for 1 sec (check engine light will go out)...count the flashes of the check engine light....that's it.

666DAN Grand Master

666DAN

Posted
Posted
You only need a 10$ multimeter to test the condition of your coilpacks

Bah-barp, wrong! You can't tell with R34 ones just by using a multimeter, they pretty much fail under operating temp, and the have an isolated firing circuit inside which will not tell you anything by measuring resistance.

Almost all R34's have the packs shit themselves, just replace them and avoid the agony and time looking into a problem that is well know and can't be fixed by silicone, tape, araldite or gypsy tears!

666DAN Grand Master

666DAN

Posted
Posted
can anyone tell me where to get spitfire coil packs from, i have a problem with ine, and cant be f**ked waiting 2 weeks plus from nengun

www.perfectrun.com.au were quick with my ones

I may even suggest Slide, make sure as hell he has them in stock down the GC though or it could be a Nengun + billion year wait

Black Ninja Experienced

Black Ninja

Posted
Posted
can anyone tell me where to get spitfire coil packs from, i have a problem with ine, and cant be f**ked waiting 2 weeks plus from nengun

Can refer you to a supplier in brissy... he should have it in his garage.. Pm me for details if keen..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • PranK
      My new to me M35 Stagea wagon

      By PranK · Posted

      Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Chupapy
      New r33 owner

      By Chupapy · Posted

      Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • jtha7
      New r33 owner

      By jtha7 · Posted

      Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...