Jump to content
SAU Community

Recommended Posts

Item: Genuine Hks Pod Filter/airfilter without adatpor

Condition: Used but in excellent condition could do with a nice clean

Price: $40 posted anywere in Aus

To Fit: Any

Location: Melbourne

Contact: PJ on 0422 142 176

Comments: please call me if you want to make offer so just have a question about item thanks.

PIks-hks filter HKS 2

Item 2

Item- Genunine Apexi Aiffilter/Podfilter SUPER FILTER with pipe i dont no wat car its off sorry

Condition- Used But in good Condition

Price- $50 POsted anywere in AUS

To fit- Any

Location-Melbourne

Contact- PJ 0422 142 176

Comments- PLease call me if you want to make an offer or if you have any questions about item

PIks- APEXI FILTER APEXI FILTER 2

Item 3

Item- Geniune Bride Zeta III With out Rail. No Harness With Seat As Shown In Picture

Condition- New But Has Been In Car For A Car Show No Marks Or Rips On It

Price- $620 pick up but i can drop off in melb metro

To fit- Any car

Location- Melbourne

Contact- PJ on 0422 142 176

Comments- please call me anytime if you want to make an offer or if you have any questions.

Piks- Bride Seat Zeta III

Item- Geniune Recaro SR3 RH (RED) with Supra JZA80 And JZZ30 Seat Rail. In pik its sitting on a deck chair so it doesnt got dirty on floor

Condition- Used Has Marks on side but nothing big will was out with some cleaner

Price- $400 Pick up but can drop off in melb metro

To fit- Anycar

Location- Melbourne

Contact- PJ on 0422 142 176

comments- please call me anytime on 0422 142 176 if you have any questions

Pictures- Recaro 1 Recaro 2 Recaro 3

Edited by pj-33
Link to comment
https://www.sau.com.au/forums/topic/214078-few-parts-for-sale/
Share on other sites

far out i new i shoulda bought the seat as well lol harness all good just gota figure out where to fix them to the chasis and where the side ones bolt to ugh.

RECOMMENDED SELLER!!! top stuff mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...