Jump to content
SAU Community

Recommended Posts

hey guys, looking at selling my nissan 200sx, with an RB26.

its had over $100,000 spent on it and i have receipts to prove it all, car was built for go and show.

i'll list some basic mods and put in mroe specific ones tomorrow, but this is it-

rb26 head, rb30 bottom end (both been built)

R33 GTR motor + R33 garbox

HKS T51R

customer stialess steel manifold

CUSTOM 3.5" stainless steel exhaust + FMIC kit

TURBOSMART 50mm PROGATE

HYPERTUNE plenum + 100MM throttle body

NISMO twin plate clutch

custom 3" one peice tailshaft

880CC injectors

SARD fuel rail and fuel pressure reg

WALBRO lift pump, CUSTOM surge tank, 2 x BOSCH 044 external pumps, 2 x EARLS billet fuel filters + braided fuel lines ass to nose

HALTECH E11v2

HALTECH GENIII external coils

BLITZ SBC ID3 electronic boost controller

B&M oil cooler kit

MISHIMOTO 60mm radiator + 2 xx 12" MISHIMOTO slimline thermo fans

GREDDY 260 degree IN/EX cams

GREDDY cam gears

GREDDY 1.8mm head gasket

GREDDY pulley kit

ROSS harmonic crank pulley

GATES radiator hose kit

GREDDY suspension

SABER gauges

ECC custom modified sump

URAS type S kit

URAS NS01 wheels

custom smoked tail lights

NEW ANGEL EYE HEAD LIGHTS BEING PUT IN THIS WEEK AS WELL!!!!

an amzing buy for something completely different.

Price is $70,000 but is negotiable and i would also consider swaps of interest...

post-37259-1208144340_thumb.jpg

post-37259-1208144382_thumb.jpg

post-37259-1208144525_thumb.jpg

post-37259-1208144558_thumb.jpg

post-37259-1208144569_thumb.jpg

post-37259-1208144679_thumb.jpg

post-37259-1208144840_thumb.jpg

post-37259-1208144994_thumb.jpg

post-37259-1208145119_thumb.jpg

post-37259-1208145641_thumb.jpg

post-37259-1208145770_thumb.jpg

post-37259-1208146016_thumb.jpg

post-37259-1208146145_thumb.jpg

post-37259-1208146280_thumb.jpg

Edited by rb26 200sx
Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/
Share on other sites

power figure still coming as its getting tuned as we speak... pulled 500hp with the original rb26 bottom end, off the first run, as in... untuned!!!, heard a bottom end noise wen tuning it after that first run, so i bought the rb30 bottom end. :D

actually surprisingly i have only ever been pulled over once and only got fined that one time... cops usually, pull me over to have a look, they mostly like it, it's the kind of car thats too nice to thrash, people respect it cuz its different. ;)

By the way, my fine was for the fibre glass bonnet which is actually complianced my QLD transport, the cop didnt know that you can buy legal fibre glass bonnets from blitz, so he gave me a defect, it all got cleared when blitz called him and did their thing :D

Edited by rb26 200sx
Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3794211
Share on other sites

I'll be in QLD next week, can I arrange to come see it in action?

hey guys, looking at selling my nissan 200sx, with an RB26.

its had over $100,000 spent on it and i have receipts to prove it all, car was built for go and show.

i'll list some basic mods and put in mroe specific ones tomorrow, but this is it-

rb26 head, rb30 bottom end (both been built)

R33 GTR motor + R33 garbox

HKS T51R

customer stialess steel manifold

CUSTOM 3.5" stainless steel exhaust + FMIC kit

TURBOSMART 50mm PROGATE

HYPERTUNE plenum + 100MM throttle body

NISMO twin plate clutch

custom 3" one peice tailshaft

880CC injectors

SARD fuel rail and fuel pressure reg

WALBRO lift pump, CUSTOM surge tank, 2 x BOSCH 044 external pumps, 2 x EARLS billet fuel filters + braided fuel lines ass to nose

HALTECH E11v2

HALTECH GENIII external coils

BLITZ SBC ID3 electronic boost controller

B&M oil cooler kit

MISHIMOTO 60mm radiator + 2 xx 12" MISHIMOTO slimline thermo fans

GREDDY 260 degree IN/EX cams

GREDDY cam gears

GREDDY 1.8mm head gasket

GREDDY pulley kit

ROSS harmonic crank pulley

GATES radiator hose kit

GREDDY suspension

SABER gauges

ECC custom modified sump

URAS type S kit

URAS NS01 wheels

custom smoked tail lights

NEW ANGEL EYE HEAD LIGHTS BEING PUT IN THIS WEEK AS WELL!!!!

an amzing buy for something completely different.

Price is $70,000 but is negotiable and i would also consider swaps of interest...

post-37259-1208144340_thumb.jpg

post-37259-1208144382_thumb.jpg

post-37259-1208144525_thumb.jpg

post-37259-1208144558_thumb.jpg

post-37259-1208144569_thumb.jpg

post-37259-1208144679_thumb.jpg

post-37259-1208144840_thumb.jpg

post-37259-1208144994_thumb.jpg

post-37259-1208145119_thumb.jpg

post-37259-1208145641_thumb.jpg

post-37259-1208145770_thumb.jpg

post-37259-1208146016_thumb.jpg

post-37259-1208146145_thumb.jpg

post-37259-1208146280_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3795480
Share on other sites

Wow Dmat, awesome, truly awesome, when you told me a few months back u were getting a rb26 i was looking forward to seeing it.

Sad to see your selling it.

Bryn

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3798187
Share on other sites

Wow Dmat, awesome, truly awesome, when you told me a few months back u were getting a rb26 i was looking forward to seeing it.

Sad to see your selling it.

Bryn

yeah dude, it'll be tough, but time to move onto bigger and better things :D

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3802099
Share on other sites

  • 1 year later...

hi my names sebastian i have an s15 i am also looking at putting an rb26 in my silvia and i was wondering if u could tell how hard it was?? and wheather you had photos of when it was getting done?? if ud care to share any pics or info my email is [email protected]

thanx

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-4686104
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...