Jump to content
SAU Community

Recommended Posts

The recommended fluid is some kind of Nissan fluid, I think its Nissan D-matic or similar. Search for ATTESA or ATTESA fluid change or similar, you will find the info you need....

You can use Brake Fluid. Thats what I did and it fix the problem.

Brake fluid???? Are you sure?

GeeTR thats correct, the recommended fluid from memory is ATF III (power steering fluid). although Nissan recommends the Nissan D-matic stuff...(slightly different to ATF III).

Personally I use a synthetic ATF III which is supposedly compatible with Nissan D-matic (according to East Coast Autospares)/

Brake fluid!!!!!!!! hmmm................mate that works on GTR's recomended me to use dexIII or the genuine ( nissan ATF ) on low powered GTR anything with large amount of horsepower he said use a synthetic ATF or hydralic oil......

seems to work well

Brake fluid is used as an old trick to breathe some life back into old hard seals. It was used in automatic transmissions which also use ATF with the same purpose of helping soften old hard o-rings. As the o-rings are what prevents/directs the ATF through the transfer case / auto transmission, when they go hard they leak fluid past. However it is never used alone, only as an additive to the correct ATF. These days there are specially formulated additives to do the same job.

Edited by Godzilla32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...