T04z With Stock Intake?!?

[GreeceS13]

It will be restrict the stock intake for the T04Z? Better to buy a china big single intake?

[Cjmartz2k]

RB26? I know a lot of people here on Okinawa running the stock RB26 intake around 600rwhp. You should be fine. I'm not saying a greddy intake wouldn't be better, but I don't think the stock one will choke it to bad. Do they even make cheap china greddy copies for the RB26?

[N1GTR]

By intake do you mean air filter or plenum?

[STATUS]

if your talking plenum use the NISMO item over the GREDDY one.

[GreeceS13]

Yes I mean plenum.

Ok Nismo and greddy are good but the stock is restrict?

My engineer like the single throotle plenums.. if I will change I would like to put a single throotle! They aren't good?

[luke20t]

stock one is fine unless your planning to make over 600hp

[STATUS]

individual is far better for what you are looking for, the single throttle body is usually used as an excuse by poor tuners using map based systems who cant tune around the vacumm/boost signal difficulties... or when crazy power is needed and the individual throttles become a restriction.

because you are running maf tuned rom i would only change the plenum and retain the std individuals.... use metal gaskets and a phenolic gasket between head and throttles... makes a big differrence to inlet temps on the 26.

[GreeceS13]

Thanks for you reply!! Very usefull...!

That's why my engineer wants single! He told me that we will have problems with the idle!

I use tomei gasket combiation kit so I have all of them but they are all metal... I don't know what it is phenolic and if they are! How can I see it?

So I will go for greddy or nismo

And I will choose Greddy as it has half price

Edited April 27, 2008 by GreeceS13

[STATUS]

Thanks for you reply!! Very usefull...!

That's why my engineer wants single! He told me that we will have problems with the idle!

you will have no idle issues as you are using MAF.... not MAP. Your engineer is confused.