Jump to content
SAU Community

Recommended Posts

ok so i came across this thread on G35driver..

http://g35driver.com/forums/showthread.php?t=199456

and it turns out that in the USA, all G35's that have power seats have the heater elements pre-wired into them!

all you have to do is find the plug under the centre console and plug in the OEM switches and the heaters work

note that this is on the sedan in the above thread

so i was thinking, i wonder if the seat setup is the same for the V35? i know that heated seats were offered on the 70th anniversary V35's

it would be easy for us to simply use fast to see if there are different part numbers for the different seats. if not, and they have the same part number then its probably simply that the seat is the same but usign a different cover for the 70th anniversary seats

i have ordered a set of the switches from the USA but unfortunately i cannot find the said plugs in my car as they are pictured on the sedans in the above thread. i am hoping they are jammed away in a hidden spot somewhere or slightly different for the coupe.

maybe someone else can pull their centre console off to have a look if they have the plugs?

let's hope we have unlocked a nice hidden secret here!

cheers,

Warren

Link to comment
https://www.sau.com.au/forums/topic/217106-heated-seats-on-all-v35s/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

ok so i came across this thread on G35driver..

http://g35driver.com/forums/showthread.php?t=199456

and it turns out that in the USA, all G35's that have power seats have the heater elements pre-wired into them!

all you have to do is find the plug under the centre console and plug in the OEM switches and the heaters work

note that this is on the sedan in the above thread

so i was thinking, i wonder if the seat setup is the same for the V35? i know that heated seats were offered on the 70th anniversary V35's

it would be easy for us to simply use fast to see if there are different part numbers for the different seats. if not, and they have the same part number then its probably simply that the seat is the same but usign a different cover for the 70th anniversary seats

i have ordered a set of the switches from the USA but unfortunately i cannot find the said plugs in my car as they are pictured on the sedans in the above thread. i am hoping they are jammed away in a hidden spot somewhere or slightly different for the coupe.

maybe someone else can pull their centre console off to have a look if they have the plugs?

let's hope we have unlocked a nice hidden secret here!

cheers,

Warren

That looks like a great little mod if it works! I would investigate but haven't got my car yet :yes:

i know it sounds great

i am really dissapointed that i couldn't find the splugs under my console now

but i'm hoping skizo clears up the seat issue as if the seat has all the hardware already then its going to be easy to wire up a switch whether its got a connection on the loom or not..

i know it sounds great

i am really dissapointed that i couldn't find the splugs under my console now

but i'm hoping skizo clears up the seat issue as if the seat has all the hardware already then its going to be easy to wire up a switch whether its got a connection on the loom or not..

As Chris confirmed that there do has a plug under, I am really thinking order a pair of swith:)

i know, its frustrating that jon's are right in front of your eyes!

even all the pics that i have seen of cars on g35driver they are all very visible, be it coupe or sedan, although its been impossible to find any exposed dash pics on g35driver..

eg this pic, although this car already has the switches as standard: http://g35ipod.com/images/install/25.jpg

i might have another look tomorrow. it seems the correct part of the loom runs down the passenger side of the console. but failing that, i might have to leave it for you in a few weeks time chris..

in th meantime, everyone else go have a lok to see if you have the plugs!

less typing, more searching!

The link you provided is the same one I read only a few days ago. My thoughts were that the seats were a bit of an unknown as in the example used were swapped seats.

Did I miss something?

yeah you are getting confused - there were 2 similar posts about this on g35 driver..

but the crux of this thread was that they found that the loom and heating elements are already there in the STANDARD seats as long as they were the power seats and not the manually operated seats

this is on the sedans anyway, and jons car (also sedan) has the plugs poking you in the face when you look at it

i'm hoping that on the coupe they are tucked away somewhere but to be honest it didn't look like it when i had a brief look earlier today

jon,

if yo get me the switches I'll set it up. in the mean time I'll work yours out. if they are there then you are not swapping seats are you

:laugh:

Hmmmm..heated seats....leather seats....heated seats...leather seats...nah I think I'll have both thanks!

No. but i have one of these...... will it do?

post-49637-1209554674_thumb.jpg

NO!!

they are good for popping airbags. think there are 8 or so on these so I would only use a meter in them. if it is a LED one then that is a different story. still prefer a meter.

jon,

I'm bored so I'm tearing yours to bits.

hey mate,

looks like a sedan?

were they just sitting there or hidden?

Yes its a sedan, and yes they were hidden underneath the black air-con vent that goes to the rear. Had to rip off some tape and pull the wires out, I could feel the plugs though so I knew they were there.

Fingers crossed that this will work. I was so disappointed that my car didn't come with heated seats.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...