Jump to content
SAU Community

Recommended Posts

Nick just suggested seeing what it would cost for one brand new. There is no way i'd go new for that price.

Have you been able to get a hold of a Z32 AFM yet for your build?

...talking about builds, at the workshop where I take my car there was a R33 gtst with high mount CGC turbo (600hp X?? range). started spooling at 4000rpm and hit full boost at 5500rpm.

He had what looked like a modified standard plenum that was forward facing, turbosmart external wastegate, and worked internals.

Where you going that extreme (basicly it was for drag racing and not that much for street).

Mark

Guest INASNT

i had the z32 afm ages ago, i just got the plug for it yesterday and its all installed. I got external gate and 3037 going on custom manifold! the internals are staying standard till it blows or when i decide to spend more dosh at once with headwork, 1.6mm head gasket, forged piston, short penned rods and nitrided crank!

Originally posted by MRK25T

Nick just suggested seeing what it would cost for one brand new. There is no way i'd go new for that price.

Have you been able to get a hold of a Z32 AFM yet for your build?

...talking about builds, at the workshop where I take my car there was a R33 gtst with high mount CGC turbo (600hp X?? range). started spooling at 4000rpm and hit full boost at 5500rpm.

He had what looked like a modified standard plenum that was forward facing, turbosmart external wastegate, and worked internals.

Where you going that extreme (basicly it was for drag racing and not that much for street).

Mark

That would be this one ?? Same as the one I want for my RB30DET Conversion...

r33turbokit.jpg

Im not sure what brand it is, my mechanic had it and put it on the exhaust side. It wasn't touched when I got the tune as the guy tuning didn't believe it made any difference.

I heard cams can make a difference of 30kw in the lower power band, is that correct? might be worth investing in some.

Mark

Hi Mark25T,

You can buy Z32 AFM's from Petroject in sydney, in an as new condition go to http://www.petroject.com.au/ and look under EFI parts or call them on 1300 30 40 60, they won't cost you $850 thats for sure!

As for the plug that connects to the Z32 AFM yes you will need to get a new one. The plug that goes onto your existing AFM will not plug into the Z32AFM however all you need do is obtain a plug from a RB30 (out of a VL) as this plugs straight onto a Z32AFM..well it did when i installed Z32AFM's on my car! Just take your Z32AFM to any VL wrecker to make sure it plugs straight on.

cam gears make a huge difference in the tuneability of the car. My car was not making boost until around 4200rpm and full boost not being reached until after 5000rpm I then had it tuned with heaps of attention being paid to the cam timing via the cam gears...end result boost starts at 3000rpm and reaches peak boost at 4400rpm, thus much better street performance. Really just depends on what you want your car to do!

Cheers

Guest INASNT
Originally posted by STUGTR

Hi Mark25T,

You can buy Z32 AFM's from Petroject in sydney, in an as new condition go to http://www.petroject.com.au/ and look under EFI parts or call them on 1300 30 40 60, they won't cost you $850 thats for sure!

As for the plug that connects to the Z32 AFM yes you will need to get a new one. The plug that goes onto your existing AFM will not plug into the Z32AFM however all you need do is obtain a plug from a RB30 (out of a VL) as this plugs straight onto a Z32AFM..well it did when i installed Z32AFM's on my car! Just take your Z32AFM to any VL wrecker to make sure it plugs straight on.

cam gears make a huge difference in the tuneability of the car. My car was not making boost until around 4200rpm and full boost not being reached until after 5000rpm I then had it tuned with heaps of attention being paid to the cam timing via the cam gears...end result boost starts at 3000rpm and reaches peak boost at 4400rpm, thus much better street performance. Really just depends on what you want your car to do!

Cheers

retard the exhaust cam gear by 4 degree and u get a good power gain

Guest INASNT
Originally posted by MRK25T

Petroject doesn't sell them anymore because they have had problems in the past. They recommended Hills because they are not dealing in them anymore.

Any other suggestions Stu?

Mark

search the for sale section u will find 1 for sale, i bought mine from the forums

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...