Jump to content
SAU Community

Recommended Posts

Hey,

any one out ther etried the Falken FK451's ?

in particular on standard R33 GTSt rims?

they seem like a really good tyre, but I was told that the Falken tyres are alot better in the larger/wider tyre sizes... can any one confirm/deny this?

I was looking at just replacing th estock the stock tyres on the stock rims, but not too sure... any other suggestions?

Also, just to confirm... R33 GTSt stockies are 16*6's y/n?

I've been told 16*6's and 16*6.5's... and I'm too lazy to take the wheel off :D

Thanks

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/
Share on other sites

I saw these 2 threads... and other stuff from other forums and on the net... just a bit worried about putting them on the stock rims though.

Ah well, I'll give them a whirl and see how they go, got about 1 mm on the back and 2mm of tread on the front... have to bite the bullet and find something soon!

Thanks,

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-462774
Share on other sites

they are alright for performance, only noisey and have bad ride quaility.

they are all the same as they made with same compound, size won't affect the quaility.

The only reason most ppls with big rims having them, is because they are the cheapest performance tyre which have LARGE range of size.

most of the brand only sell their TOP of the range performance tyre in low profile 17/18 or even 19. but falken have all of them even with the lowest range

stock rim should be 6"5, fit 225/50/16

but i heard some one fit a 245/45/16, not sure though.

hope that help

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-463264
Share on other sites

Well Fk451 are not too bad but have you ever thought about the ST115s? These are basically street Azenis rubber that have a soft compound but are great at giving you feedback and stick really good too. There not that much more then the FK451 but are heaps better when it comes to handeling and they have very little tyre noise too. Hope that helps mate.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-469892
Share on other sites

Really good JimX. Wet or Dry, i have found these tyres extremly good. Even in the wet they have the same amount of feedback as in the dry. Heaps better then the FK451. Only down side is that they might wear abit qiuk due to it being a softer compound but that's the price you pay for having good tyres.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472153
Share on other sites

I'm used to having soft tyres. I need to replace the rear on my motorcycle every 6000km or so @$300 a pop. I think I'll try the ST115's, especially since they were cheaper than the FK451's (unless the shop guy got the prices wrong when I rang).

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472346
Share on other sites

Is $280 per tyre for ST115 in 255/40/17 a good price? That's what I got quoted from my local Falken tyre shop. The ZE326's and FK451's were both $320 each. Is there anyplace in Sydney that can do better than $280 for the ST115's?

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472516
Share on other sites

I think I stuffed up, I think I confused the prices I got for the ZE326 and ST115 around the wrong way. Which would mean this place sells the ST115's for $310. In that case, where can I get the ST115's for $280 in Sydney?

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-473312
Share on other sites

For anyone that's interested, I found out why ST115's have low road noise. According to Falken's American site, the ST115's have "Base tread rubber compound contains micro vacuum capsules that literally suck up road noise". I'm assuming that this also means less rubber hence they wear out quicker.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-483291
Share on other sites

Going off reports on both I don't think they are worth the price difference. But this is only a rough judgement call based on other people's opinions, there's no way to tell unless you've test-driven both yourself. If I had lots of spare money I'd buy the best tyres I could but I can't so I'm going for the ST115's or FK451's (probably the former).

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-492475
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...