Jump to content
SAU Community

Recommended Posts

ok, so i have a hks2535..

do i keep on adjusting my boost via the adjustable actuator (will annoy me after a while) - i know its better to keep the wategate shut for as long as possible yada yada

or

lower actuator to lowest + install the turbo tech i got sitting here

or

lower actuator to lowest + be a wanker and have a cool hi/low switch for daily driving then 'spirited' (as u sau gents call it) driving?

winter is approaching, dont think i need 18psi to do wat i do, rather keep it low and give the thing a easier workload for a bit.

i already have all the above parts next to me, i just started my apprenticeship so things like profec b are not an option right now as id rather make-do with the above suggestions...

any ideas?

Edited by DjeMz
thats the thing, sick of feathering the throttle....

:thumbsup:

just dont mash it to the floor all the time.

I ran 24psi/350rwkw for ages, never really had a problem or needed to turn the boost down.

Even daily driving @ 270rwkw/17psi, 65-75% throttle = no problem easily.

Work with what you have...

Just use the turbotech to raise your boost to the desired level while using the adjustable actuator to control spiking or increase response...

I run the exact same setup with the same turbo on my rb20...works a treat...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
    • Isn't there a PAR engineering gearset that has closer to stock ratios? And they claim they'll do whatever ratios you want.
×
×
  • Create New...