Jump to content
SAU Community

Recommended Posts

It looks pretty straight forward mate, Im going to do the same thing soon, as my P/S resivoir is leaking. I think one of the hoses has a split in it. Looks like your a type of bloke thats willing to pull apart and learn as you go, I say go for it..... Have a look for the lowest point in the lines or if there is a bung in the bottom of the P/S motor itself. Like I say, It should be pretty straight forward.

Sumo

I just get one of those oil pumps and remove as much fluid from the reservoir as i can. Then i fill it up, and run the engine for a coupla minutes and then repeat about 2 - 3 times until the fluid is bright red like the ATF im putting in! The manual never mentions anything about replacing PS Fluid but I do it every coupla years or so just to make sure.

On the R32 there are 2 bleeding points in the rear steering rack. I imagine the best way to bleed this would be whilst in diagnostic mode while the rear wheels are turning. THIS DOES NOT APPLY TO R33 AS IT IS ELECTRIC NOT HYDROLIC.

Air normally works it way out of the system fairly quickly. I've never seen the need to do this. Just turn the wheel from lock to lock a few dozen times and that seems to work.

undo any hose lower than the reservoir and let it out then turn the steer a few times and more will come out never all of it though . u can undo the pipe on the rack itself then u'll get more out the do them up and fill her up . when the reservoir is full start the engine and as the level goes down keep filling once its full turn steering a few times and fill up again the system bleed sitself out but make sure the level is right when u finish once its bled out u'll see the oil just red no more bubbles in it . i hope it helps u , its an easy job to do .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...