Jump to content
SAU Community

Recommended Posts

hey guys,

i'm taking the car to the mech tomorrow morning. but just need some ideas quick

Took off to go to work bout 6pm, car is still warm as i only got home at 5.30pm, so no need to warm up the car

come out of my driveway, probably hitting 3000rpm ish, car goes POOOOP, i was like wtf. Then power starts cutting out(lights start dimming and going bright again), eventually the car stablises, idles at 1000rpm, then alll of a sudden the revs build up slowly.....from 1000rpm to 5000rpm. so i turn off the car

so i opened the bonnet to make sure my accelerator cable wasn't caught. everything looks fine.

turn the car on, car revs slowly up to 4000rpm again~!!!

then i turn it off, stepped on the throttle again.

and turned the car on again, this time it idled properly. at 800rpm ish.

so i put the car back in the garage, and go to work as i'm alrdy late.

come back 4hrs later

turn on the car, idles properly, so i tried to back it out. i reversed about 5metres, car starts acting weird again. i let it idle, and it idles hell rough with revs jumping up and down ( 800-1000rpm). and the car sounds like a rex

so i wait for 2 mins with he car on, then the car idles and sounds normal again.

tried to take it for a drive. the car feels hell weird, no power at all. so i tried to slowly boost it..but NO boost at 4000rpm..wtf..i can hear the turbo spinning making a weird sound...

then the car starts losing power again. it struggles to idles. then stallls...wtf

i can still turn the car on, but idles hell weird. doesnt have power at all and doesnt make any boost

so any suggestions? please, i need to know whats wrong lol. or i cant sleep tonight

coilpack? turbo? cylinder?

and btw lately when i take off slowly i can hear a very light 'hummming' noise from the engine, but never took notice of it

i also have a vented bonnet. but it's only vented on top of the radiator. so i assume it has nothing to do with it as water only goes to the radiator

so any suggestions plz/??

cheers

steve

sorry bout the long post, and it probably doesnt make sense.

Link to comment
https://www.sau.com.au/forums/topic/219402-wtf-my-cars-fked/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I had a air line come off the front of my motor, ran like shit , almost like on 5 cylinders.

Just go through everything around the engine, also you might have a dud Injector, been there....

I am around the corner, so If you wanted too I could come by and have a look....

Bit late now.

Mike

Hey Mike, which 'reputable' imports workshop is closest to innaloo? i wanna drive the car there instead of towing it

the one i usually used is like 20km's away so i dunno wanna drive that far

I looked on the 'The Consolidated Workshop Thread' and closest is 'Speedworks' in osborne park. but never heard of them

hmm, still sounds like a pipe has come loose, have had this happen to me a few times in silvia/skyline, exact same issue was due to a pipe coming off turbo, may look like it's on but.. air still may be escaping, doesn't take much when it comes to compressed air :spank:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...