Jump to content
SAU Community

Recommended Posts

Thats true however when you live down an area such as I used to there are lots of young peoples flying around. The cops tend to then classify all people that drive a sports/v8 as a bit of a hoon so they do have an attitued when they pull you over even if you havn't done anything wrong.

I don't live down that way anymore however when I visit my parents who do live down that way I occasionally get stares from cops sitting at traffic lights etc. There are a lot of Silvia's flying around down that way.

There is now a LS1 SS commodore that they use to catch all the hoons down there as the V6's just wern't up to it.

But yer your theory is right. I guess that counts out car cruises.

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Guest INASNT
Originally posted by browny

On the other hand tho  - a lack of brain cells can also result in illegal mods. I bet cops and auto engineers would have some pretty good stories about downright stupid and dangerous mods people have tried.

My theory is that if you don't put yourself in the position to be harrassed by the cops (ie dont act like a tosser on the roads and dont hang out with people acting like tossers) then your chances of being pulled over are minimal.  

Also if you are civil to the cop and can demostrate that the mod is safe, legal and engineered (ie you have a copy of the certificate in the car) then you are in a lot better position to go free than someone who has a bad attitude.

I havent got to try this theory out yet tho 'cos i've never been pulled over.

that theory not not acting stupid and not being pulled over is just theory since u stated u have never infact been pulled over!!

I on the other hand have been pulled over on multiply occasions. 1'c it was 4.30am and i was on the way to work which was at 5.00am. I drop past a parked cop car at about 40 behind another group of cars doing 40 in a 60 zone. Cops c me, do a quick u turn and then pull me over at the lights, breath test me 0, check license, all points there, yet i still get a canary. Similiar thing happened again this time i turned off a freeway exit at around 9.00pm and was sitting on around 60, a cop car comes flying from atleast 1km behind me, tails me for another km and then stops me 0 breath tests me and canarys and epa's me!!

My theory is that if you don't put yourself in the position to be harrassed by the cops (ie dont act like a tosser on the roads and dont hang out with people acting like tossers) then your chances of being pulled over are minimal.

this theory of your is not realist my friend, and it will change when u get pulled over for bs and booked

Don't take me wrong though a eng. certificate if you show to the cop that has pulled you over will give you a more benifit of the doubt as he will see that you are attempting to do things the right way and make your car safe.

This has to be a plus. Even in the unfortunate circumstance that you do get sent to the pits if you engineer has done his research properly and knows what he can and can't do or has to do in order for the car to be legal and safe the pits wont be a problem and just an inconvenience.

that theory not not acting stupid and not being pulled over is just theory since u stated u have never infact been pulled over!!

Well since I haven't been pulled over, maybe I am doing something right :P...or maybe the cops here are just a bit more relaxed.

When I was in Newcastle I didn't see any cops come to think of it.

I did see a hooker at a bus stop hitch-hiking every day for the 4 days I was there. I'm trying to think the main road bit that was on as the roads feel strange over there. I stayed in a Caravan park that had little houses we hired out. There was also a Tyre joint just near it. It was also close to the sea well relatively close.

  • 11 months later...

Dont bother. I lived in WA, and a cop mate of my brother told me that - with similar mods to what you quoted.

He said that unless I go lighting up the tyres in town, or doing laps around the city or Kings park - I will never get pulled over, and I didnt.

If you do have to get a defect removed, you just pay $30 at the same time and get a permit for those mods. Its that simple. Drop MetBlueGTSt a PM, he has had his done.

  • 1 month later...

I have never owned a "standard" car in my life, every one of them has had mods. If the cops pulled me over I would argue the point, nicely of course. If they insisted, I would get the car inspected, but you don't have to do it right there and then. I always had plenty of time to change over the bits that needed changing. That's why I never sell or throw out the standard parts.

An example, I go for the inspection, the inspectors says "that's a standard airfilter, why did the police officer give you a ticket?" " I have no idea, maybe it was the sticker on it that he didn't like." Hint, I always have little things on the standard parts, a little sticker, a different clamp, a blue hose, anything that I can point to as being the reason.

I always keep the receipt from the inspection station, next time I get pulled over I show the officer the receipt. "I have already had this checked and the inspector passed it, if you make me go and needlessly get it checked again I am going to sue you for harrassment and loss of a days pay while I go. It''s your decision officer". They always back down.

The only thing you have to be careful of is cameras, never ever give them permision to take a picture of your car.

Remember it's all a game, don't take it seriously or personally and never get mad. ;)

SK thats interesting you say about cameras and photos.

A mate of mine was pulled over earlier this year, and the police dude took photos of the 'suspect' items that he wrote on the ticket. He made it very clear he was going to be passing them on around the station so they could be checked.

When we returned to the station after fixing them, he just looked at the car, 5 seconds later... yeah thats all ok buddy, thanks.... hmmm.

I dont like the photo idea

I have never owned a "standard" car in my life, every one of them has had mods.  If the cops pulled me over I would argue the point, nicely of course.  If they insisted, I would get the car inspected, but you don't have to do it right there and then.  I always had plenty of time to change over the bits that needed changing.  That's why I never sell or throw out the standard parts.

An example, I go for the inspection, the inspectors says "that's a standard airfilter, why did the police officer give you a ticket?"  " I have no idea, maybe it was the sticker on it that he didn't like."  Hint, I always have little things on the standard parts, a little sticker, a different clamp, a blue hose, anything that I can point to as being the reason.  

I always keep the receipt from the inspection station, next time I get pulled over I show the officer the receipt.  "I have already had this checked and the inspector passed it, if you make me go and needlessly get it checked again I am going to sue you for harrassment and loss of a days pay while I go.  It''s your decision officer".  They always back down.

The only thing you have to be careful of is cameras, never ever give them permision to take a picture of your car.

Remember it's all a game, don't take it seriously or personally and never get mad. :D

That's all well and good from getting out of fines etc point of view, but the reason I intend to get my project car fully certified is more of a liability point of view.

If your car has uncertified modifications which could deem it unroadworthy without an enigneers report, then what is the point of having insurance.

Last thing you would want is to smash into the back of a ferrari or be involved in a fatality with a car that was illegal to be on the road in the first place. Sure many people say thay will just bring it home and swap the parts back over, but if the car cannot be driven after the accident or a fatility and police are involved, I'd say that wouldnt be as easy and insurance companies will scrutinise your car if they have to pay out big dollars and look for any excuse not to pay up.

I would not recommend getting engineering reports done interstate if coming back to sa. I had my previous car, series 3 bluebird with a CA18DET dropped in it, engineered in nsw because i moved there for 12 months, then tried to come back to sa, and they would not except it. Wanted it engineered again here, because our laws are more stringent or some shit. End result, spat the dummy and bought a 32, because i refused to pay another $1200-$1500 to have it engineered, when it only cost me $300 in Wagga to get done.

I wanna know how interstate can have mods engineered to ADR standards....which dont seem to apply here in SA.

ADR = AUSTRALIAN design regulations

how can one state pass items regarding these standards, yet SA it costs an arm and a leg to do it. PLUS its not guaranteed REGENCY will pass ENGINEERED mods from another state. Yet they use the same ADR's to go by.....

HOW THE HELL DOES THAT WORK????????? :rant:

Remember it's all a game, don't take it seriously or personally and never get mad. :P

And act stupid! Don't know how many times claiming that I didn't know a mod had to be engineered save me from getting a canary!!

I've had my R34 fully engineered here in Coffs Harbour for $500, with a discount being given on future mods if done within 3 months between engineering. i.e $120 to engineer a pod filter, etc.

Can be an expensive exercise getting your car engineered, but not as expensive as not!!

My two cents.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I do believe from context he is talking about a S0/S1 R33 RB25 with associated ECU and Wiring for that, and a manual gearbox into a R34 N/A Auto. I don't have the knowledge of all the pinouts and such but my gut feeling from doing my own conversion is to use as much of the R33 stuff that you can. The "car" wiring is quite seperate from the "Engine" wiring when all things are considered. The only things to truly consider 99% of the time is the cluster, reverse lights and potentially disabling the 'not in P/N' immobilizer circuit.
    • A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
×
×
  • Create New...