Jump to content
SAU Community

Recommended Posts

Hi Guys Just need some help. for the past week Im having problems starting my car. Almost everytime that I have to use it I have to Jump Start the Battery.

Nothings draining the battery but I think the battery does not charge at all.

My guess would be the alternator....but not 100% sure. Any advice will be good :)

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/219854-help-battery-problems/
Share on other sites

So it's not pushing out enough voltage to turn the starter motor.

Basically, what Zennon said is your best option. Otherwise, if you're an RACQ member get them to come out and try it (and then try and sell you a battery). Either will do the same thing.

So it's not pushing out enough voltage to turn the starter motor.

Basically, what Zennon said is your best option. Otherwise, if you're an RACQ member get them to come out and try it (and then try and sell you a battery). Either will do the same thing.

Yep its not pushing enough voltage... hmm looks like ill be needing a new Battery.

I'll go to an auto electrician to get it checked.

Thanks Guys for the Help and advice! :starwars:

have you got a meter handing at all? that will tell you if its just dropping the voltage when you turn the key which means its leaking somewhere.

are the terminals and connectors hot at all? that would indicate a shit connection in which case tighten the connector or check for a lose terminal. check water levels too. if you have a meter that will pretty much tell ya the story straight away.

hey bud , i had the same problem its your battery , with skylines if the battery dies you heara ticking sound when trying to turn the ignition over , usually means your battery doesnt hold charge anymore

My battery kept going flat in my 34 when i first bought her. I had the battery replaced under warranty by the car yard, but it still kept going flat. Ended up being the dodgey head unit that was in the car was draining the battery during the day. Some dodgey assed wiring or something.

have you got a meter handing at all? that will tell you if its just dropping the voltage when you turn the key which means its leaking somewhere.

are the terminals and connectors hot at all? that would indicate a shit connection in which case tighten the connector or check for a lose terminal. check water levels too. if you have a meter that will pretty much tell ya the story straight away.

i dont have a meter handing at all, I'll ask the electrician to check if theres any leak in voltage.

Its the cold weather. You always see a heap of batteries die as soon as the temperature starts getting colder.

Generally means its time for a new one. Whilst they always cycle in temperature normally, the big reductions

when you come into winter is enough to push them over the top.

Just means your battery is at the end of its life.

as you figured out by now, your battery isnt hloding charge..

best bet is buy a new one, not expensive.. no piss farting around.. however with certain batteries you can check the water level.. (little caps you can unscrew.. and make sure the water level is right..

but even then i'd still go with the new battery.. best option

My battery kept going flat in my 34 when i first bought her. I had the battery replaced under warranty by the car yard, but it still kept going flat. Ended up being the dodgey head unit that was in the car was draining the battery during the day. Some dodgey assed wiring or something.

sounds like a brisbane car sound thing ay :(

my battery is doing the same, ever since i had my alarm installed from brisbane car sound..

gone thru two batteries now... car is currently flat and dead at home, unless i jump it.

I don't think it means alarm is necessarily incorrectly installed though..

I have an old hilux with like no electronics - can leave that sit for a couple of weeks and all is fine

But if I leave the skyline sit for couple of weeks the battery goes dead (it has alarm)

ps. cold weather wouldn't be helping either

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...