Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: Pulsar GTI-R

Milage: 135000 km

Transmission: 5-speed

Colour: Grey

Location: Brisbane

Complied? Yes

RWC supplied? Yes

Currently registered? Yes

Price: $12000 with black GTI-R bonnet or $11500 with matching grey N14 standard bonnet

Contact: Simon 0403 653 055

Comments / Modifications:

This car has been very well looked after, maintained and sensibly modified. This car is very reliable and easy to drive. It has been driven daily by my wife to work for the past year.

It is available with a black standard GTI-R bonnet for $12000 or a stock N14 Pulsar bonnet in matching grey for $11500

ENGINE MODIFICATIONS:

-Front-mount intercooler (core custom-made for GTI-R, much shorter piping than other cheaper kits)

-3" stainless exhaust, including custom dump pipe, 4" cat and electronically controlled exhaust control valve (allows car to be quiet while cruising and have the power when wanted).

-HKS EVC Pro boost controller, only running 0.75bar (11psi)

-XTreme full-face organic heavy-duty clutch

-Splitfire sparkplug leads

-Nistune reprogrammable daughterboard (running stock tune). Allows stock ECU to be tuned on the fly.

SUSPENSION/BRAKING MODIFICATIONS:

-Whiteline rear swaybar

-Whiteline anti-lift/caster kit

-Whiteline front camber kit

-Whiteline front swaybar bushes

-DBA 4000 series front slotted brake rotors

-Lucas Performance brake pads

-Custom brake master cylinder stopper

INTERIOR:

-Nardi steering wheel

-Pioneer CD/MP3 Head Unit

-Infinity 6" splits (front)

-JBL 4" coaxials (rear)

OTHER:

-Mongoose M80 Alarm/immobiliser

-14" Volk CE28N wheels

-Has the factory umbrella (rare)

MAINTENANCE:

-Replaced/reconditioned: water pump, starter motor, clutch master and slave cylinders, rear engine hoses, detonation sensor, D/S engine mount, distributor cap & rotor button, harmonic balancer, rear main oil seal, clutch fork (strengthened), clutch pedal brace, timing chain tensioner, Redline Lightweight gearbox oil.

-Serviced every 5000km with Motul 4100 TurboLight oil

-Log and receipts of past 4 years of ownership showing over $11000 in modifications/maintenance

-Car has been with current owner for 4 years

Reason for sale: We have purchased a new car and do not have space for two.

A standard N14 Pulsar flat bonnet is available that has been professionally resprayed in matching grey. This gives the car a sleeper image. Price with grey bonnet instead of black GTI-R bonnet: $11 500 (pictures available on request).

Images:

Note: Flat (standard N14) bonnet has been resprayed to match the car since the last (GTIR8.jpg) photo was taken.

post-9210-1211366981_thumb.jpg

post-9210-1211366998_thumb.jpg

post-9210-1211367017_thumb.jpg

post-9210-1211367036_thumb.jpg

post-9210-1211367054_thumb.jpg

post-9210-1211367075_thumb.jpg

post-9210-1211367103_thumb.jpg

post-9210-1211367134_thumb.jpg

Edited by BoostedBarge
Link to comment
https://www.sau.com.au/forums/topic/220300-1992-nissan-pulsar-gti-r-12000/
Share on other sites

Price has been dropped to $11 000 or $10 500 with the flat standard Pulsar bonnet

Mods: please updated my first post or give me the ability to do so.

Thanks heaps

Simon

I am currently overseas. However, the car is being looked after my my father and is ready to go with RWC and forms signed. To view the car contact my father on 0432529900

Simon

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...