Jump to content
SAU Community

Recommended Posts

This year as part of the Tasmanian Drift Series the we are trying to spice things up a little bit and give spectators more to keep them entertained during the day of drifting.

Part of this involves running a show and shine to show off some of Tassie's best modified vehicles. After an ordinary showing at RND1 we're wanting Launceston to show the southern posers how its done and bring whatever you've got....

Cars will be situated at the rear of the pits in a designated area

This is not strictly for drift cars, any show quality car would be welcomed. The day can see up to 1000 or even more spectators come out for a look so if your proud of your car and would like to show it off bring it along

CLUB DISPLAYS ENCOURAGED

WHEN - 31st MAY

WHERE - Symmons Plains Raceway - Back Of Pits Area

COST - Gold Coin $$$$

TIME - cars are to arrive between 9am and 9.30pm and be parked in the designated area til the end of the lunch break, after such time you will be allowed to take the car up to the hill area to watch the action in the afternoon but its highly encouraged that you leave the car in the designated area throughout the day

Prizes awarded for Tuffest Street Car and Best Show Car

if this isnt successful its unlikely that either northern or southern events will feature a car show for the rest of the year

any queries email [email protected]

Link to comment
https://www.sau.com.au/forums/topic/220487-drift-state-series-show-and-shine/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...