Jump to content
SAU Community

Recommended Posts

Hey just wondering if you can decide on which pits youd like to take your car to for inspection??

Apparently Welshpool pits are a little more lenient!!

Problem is i just put coilovers in my 34, and really dont want to put the stock suspension back in, anybody here been over with coilovers in and passed?

Also i dont know how the whole thing works, never taken a car over so a little help would be greatly appreciated.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/220973-pits/
Share on other sites

yeah u can pass pits with coili's just make sure ur car is 10cm off the ground at the lowest point. also u can choose what pits to go to.

um u pretty much rock up at the pits examination place EARLY ( around 8-9am) then u just wait in line till its ur turn to get inspected. also u will have to pay ~$80 for the fee's.

hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/220973-pits/#findComment-3896099
Share on other sites

Hi mate, I brought my car to the pits at Welshpool for compliance. Only just made the 10cm clearance and they were pretty relaxed at inspecting the car. Heard from my mate that they are one of the most lenient around too

Link to comment
https://www.sau.com.au/forums/topic/220973-pits/#findComment-3896254
Share on other sites

Welshpool knows what they are lol...

bring a good amount of $$$...

roll your car on stockies... oh wait, yours has awesome stockies anyway so don't worry...

make sure it has a rear bar :unsure:

i think you're set to go man as far as i can think of since the last time i saw your car...

make sure the BOV isn't a loud bitch and is plumbed back and umm... the car has to be the lowest (at a minimum) 100mm off the floor with a full tank of fuel and be seated with grown adults to the cars capacity, GT-T - 5 people

if your coilovers are stiff enough it should be alright, if anything then just use some of your $$$ and get a permit on the spot, easy as, you're already there and you'll never get picked on for it ever again

Link to comment
https://www.sau.com.au/forums/topic/220973-pits/#findComment-3896689
Share on other sites

just use some of your $$$... im not rich dude, seriously... i just work hard for what i want is all... busted my ass to get this car and so far all i have gotten is... well... thats another story no one needs to hear... so

what do you mean get a permit on the spot??... for the coilovers? how much is that, atm im struggling to keep up with finances, so need to sell my little bunky to take it over, untill then, she aint going anywhere... why is life so gay...lol

Cheers for the replies guys, think ill take the 34 to welshpool when i can... again, cheers!

Link to comment
https://www.sau.com.au/forums/topic/220973-pits/#findComment-3896790
Share on other sites

dude, don't worry...

i'm broke as a f*cking corn farmer living in the sahara desert...

trust me, as for permits i have no idea how much it is but i meant bring the cash for the permit down just in case they rape you for the coilovers...

because if they don't like them and you don't get a permit, there's more unnecessary $$$ spent on an extension for the sticker and you don't want that...

end of the day, just try for it... try and get your car as stock and clean as well as tidy as possible, no loud BOV and go for it, should be okay man

let us know what happens (i'm sure you will anyway)

Link to comment
https://www.sau.com.au/forums/topic/220973-pits/#findComment-3896825
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...