Jump to content
SAU Community

Recommended Posts

have my 89 r32

ts got 240 rwkw on 15psi with heaps more potential.

-rb25 motor and gearbox.

-fmic

-has 102,000 on chassis motor not sure.

-been told it has a mod diff but not sure. done before import

-aftermarket fuel pump. not sure what it is done before import

-remapped r32 ecu for rb25.

remap was for standard smic, airbox and turbo as well as stock dump and stock exhaust to cat. ran 200rwkw on 10psi

rev limiter reset, no boost cut and no top speed cut

if remapped to new mods would make much more power.

-to4e top mount turbo with custom install

-turbo beanie. just been installed 1 week ago

-turbosmart pro gate 38 external wastegate with slip piece for screamer or plumb into exhaust

-full exhaust with custom dump

-ebc with high low boost. low is 10psi high is 15psi.

-ebc also has turbo timer not connected as well as

boost guage

output for nos and or water spray or what ever you want.

peak boost and average boost

current running voltage.

other stuff i cant remember.

tein ha coilovers.

cusco sway bars. f*kn massive about 35mm for front and rear

nismo 260kph dash doesnt look like its been tampered with.

flared rear guards to fit 18x11's which are on it atm.

upgraded 32 interior with no rips or tears.

genuine gtr front bar

panasonic head unit

2x jbl amps

jbl splits

2x jbl subs in custom box

jbl rear 2way speakers

momo steering wheel

have a 5inch tacho with shift light not installed.

i have the import approval papers

regency paperwork for compliance etc.

was insured for 17k full comp but since then added

front bar, stereo, wheels, suspension, ebc, turbo

prolly a few more things that i cant remember.

goin for full paint in 3days.

post-39965-1213864256_thumb.jpg

post-39965-1213864327_thumb.jpg

post-39965-1213864381_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...