Jump to content
SAU Community

Recommended Posts

Hi all

I was wondering if someone can help me out with a issue im having.

My abs light has turned on. I have checked all fuses and they seem fine.. Checked under the car if the sensors are loose etc..

Dont know what else to check really.. Oh done the slam the brakes and try and lock up thing.. abs didnt work or kick back in..

SO

I was wondering if i could borrow the consult cable or if i can come to you?

Will be greatly apprieacted. Probably wont take long. Just need to find the error code.

Thanks all

Link to comment
https://www.sau.com.au/forums/topic/221250-nissan-consult-cablesoftware-thingy/
Share on other sites

I had the same problem. Bought a second hand ABS pump off the forums and put it in. Problem solved.

Consult cable should tell you the exact cause though. Sensors going bad is another common cause I think.

I had the same problem. Bought a second hand ABS pump off the forums and put it in. Problem solved.

Ohh really? Whered you get a 2nd pump from?

I will check the sensors first.. Well i will see what the error codes are first and go from there

How mcuh was the pump anyways?

From my hazy memory it was $80 or so

Edit: Yep... just looked it up:

http://www.skylinesaustralia.com/forums/ab...l&hl=module

Supposedly from what that guy said in that thread they are $4500 new... I find that hard to believe... Maybe the whole kit is, but not just the pump/motor!

I will check my error code first.. then check if its the relay..

If not, then will try and source a pump thingy.. You got a pic of this btw?? What does it look it lol

I have access to a 33 gtr abs unit lol.. If worst comes to worst will this fit into my car? lol

It looks like this (circled)

post-23673-1141805971.jpg

It's that whole unit.

Surely you'll be able to find one in one of the wrecking threads, or post up a WTB thread. Get the error code before you go to too much trouble though. It could just be a dirty sensor!

Yep, thats the abs "module". I -think- it incorporates the hydraulic motor (or "pump" if you want to call it that) as well.

That unit circled is the bit that I bought for $80. I chucked it in and my ABS light disappeared so that whole unit was the problem in my case.

This is exactly what was written on the invoice for the brake place I took mine too when they diagnosed the fault:

"Scan ABS Module for fault codes. Code 21 - ABS Motor. Checked ABS wheels sensors for operation, all ok on current data. Suspected faulty ABS motor unit"

Ah that makes sense.. just wasnt sure what you meant by pump..

I will try and get the error code first and see how i go!!

Just happened out of know-where.. Turned on the car one night to go home (been raining that day and previous day) and the light came on..

Could be coz of the rain.. making the sensors go faulty.. hmm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...