Jump to content
SAU Community

Recommended Posts

Hey guys,

just wondering if you guys have done or had any friends that have done a manual conversion for their cars ( in this case for an ADM model S15 silvia with a the stocker auto looking to have an S14 box fitted) its for my best mate who asked me to post this topic on here as he trusts SAU members knowledge and opinions more so than other forums (ns.com etc)

any experiences, advice and recommendations would be greatly appreciated.

thanks in advance guys, always so helpful. :blink:

Link to comment
https://www.sau.com.au/forums/topic/221873-s15-manual-conversion/
Share on other sites

this happens evrytime someone asks for a recomendation, evryone posts there workshop of choice and we end up having nearly every workshop

in adelaide having a mention..

never ending.

check the sticky thread ''workshops''. will give you ample choices of quality workshops to make up your own mind.

Boostworx

Turbo Tune

Tillbrooks

Graham West Workshop

any other more shitty places who have radio adverts etc.

I personally would say +1 for TurboTune. Great service there, awesome price. Call up and speak to Michael, they know their silvia's pretty well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...