Jump to content
SAU Community

ford to power jordan in next years F1

skyzerr33
 Share

Recommended Posts

Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

I don't think Jag will be engineless. Cosworth will have to supply to both. Arrows may lose out though.

If only the current Ford family were more into motorsports like in the 60/70's when they came up with the GT40 just to beat Ferrari in Le Mans.

locASH Enthusiast

locASH

Posted
Posted

Cosworth ALREADY supplies both Jaguar and Arrows with their engines. So they could easily supply someone else as well. It wouldn't mean that someone would miss out.

It would mean closer racing in the middle/rear of the field though. I don't understand why Jordan would want to swap to a Cosworth engine though - seems to me the Honda engine is getting pretty good. Better than the Cosworth anyway. And also I heard that Ford is thinking about pulling out of F1 altogether. Can't remember where I head this though...

Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

At the moment Arrows are having financial woes so it looks doubtful for next year. Also Cosworth having to supply engines to 3 teams sounds like a lot to handle. It's not just a matter of throwing the motor their way.

It's not a matter of wanting to swap Honda motors for Cosworth motors, but it's cause Honda want to concentrate on one team. Currently of the two teams, BAR is the more winning team so that's the way Honda want to go.

  • 2 weeks later...
Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

Just reading the interview with the F1 managers and looks like I was right about Cosworth. They knew that Arrows was in financial troubles and forward a proposal to Jordan for next year. But I was wrong about Honda not wanting Eddie Jordan's team as it's Eddie's decision to go with which engine manufacture for next year.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...