Jump to content
SAU Community

Recommended Posts

Hi guys,

Just curious as to wear you'd have to go or if its even possible to tint the rear tail lights of your car to black?

I have an R34 25GT (2 door) and i wish to make the inner and outer circles black or atleast a shade of black, while obivously still retaining the light comming through at both day and night.

I know theres specific places for certian models where you can buy shadow and "smoked" lenses for your cars, but im not too sure there is a smoked rear tailight revision for 34's.

And yes i HAVE seen it done, i wish i had a picture but i saw it on the road, but as whack as it sounds on a 34, with the white paintjob it looks sweet!

If a DIY was to be done, how would you go about it, any help at all on this would be appreciated!

Thanks :banana:

Link to comment
https://www.sau.com.au/forums/topic/222212-tailight-tinting/
Share on other sites

nightshades is a spray in a can. avail at your local supercheap or autobarn. only thing is it dries matt and looks ghey, unless you clearcoat it or keep it polished. remember the blacker the tint, the less light, and the more defectable the car

nightshades is a spray in a can. avail at your local supercheap or autobarn. only thing is it dries matt and looks ghey, unless you clearcoat it or keep it polished. remember the blacker the tint, the less light, and the more defectable the car

Spot on Bevan.

More spot on, and true to bevans form, is that if you tint the rear lights, and you have an accident where you are hit from the rear (not your fault) it will become your fault for not having lights working to the ADR's.

Legal taillights FTW!

follow this and ull be set.

helped a mate on another r34 do it, looks quite sick, although i can imagine it lookn nicer on a white r34. with a black and white theme going on.

http://www.350z-tech.com/zwiki/How_to_Smoke_Taillights

follow this and ull be set.

helped a mate on another r34 do it, looks quite sick, although i can imagine it lookn nicer on a white r34. with a black and white theme going on.

http://www.350z-tech.com/zwiki/How_to_Smoke_Taillights

Well thats exactly what i was going for, black bonnet, white 34, matt black rims, smoked side and front indicators (Gen Nismo) with the finishing touch being EXACTLY like the tailight finish on those 350z's would make it quite unique.

Thing is i would imagine the 34 light would be harder to do without the runs than the 350 lights, especially the buffering part, so im a bit put off by the fact that I might screw it up. I wouldn't mind paying someone to do it for me if they have done it before. NRG if you can get some pics by any chance when you finish your mates 34 and post em or send em my way would be great! This is exactly the finish i want on my lights 100%.

I've only seen em like i said on the road and i havn't seen a good shot of them up close to see if they look dodge or not. Thanks for that Nrg that was really helpful :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...