Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering, anyone here got a system in their R34's?

And if so, please tell me where the hell you mounted you amp/s ?

I was in my garage today for like an hour trying to figure out a place where i could mount the amp, make sure its acessible to tune it, and where it would look good and neat. Not only that, a place where the vibrations of the subs wont cause the amps to come loose and rattle around.

Hmm.

My basic concept from a hour long haul, is that in the boot. under the stock speakers, theres like a little bit of space where you cold mount 2 amps.. but the base of that platform in the R34 boot isnt level, so i was thinking to get a peice of MDF. Mount it off the back wall oming straight and put brackets, then mount it straight into the base of the platform, then carpet it and make it look pretty :D. Then happily mount my 2 amps, and Distribution block, and future Cap.

what you guys reckon?

Anyways, any info / pics would be appreciated since i want to get my system done asap!

MRXTCZ

P.S Gear i got right now/Need to get

Source: ???? (No idea right now) [Need]

6.5 Splits in the front [Need]

6.5 Splits or just woofer's in the back [Need]

2 Subs, (12"s) [MTX Thunder X's]

2 Amps [Reponse 2 Channel 500WRMS, Response 5 Channel 700WRMS]

1 Distribution Block [Jaycar]

1 Cap [1 Farad Jaycar]

1 Bigger Battery [Need]

4G power from battery to Cap then to DIST B, splits into 8G's

Link to comment
https://www.sau.com.au/forums/topic/222449-r34-amp-mounting/
Share on other sites

i mounted mine onto a wooden board and mounted the wooden board in the boot as u can see from the pics. changing the batteries would be a b***h though as that would require me to remove everything.

im also interested in this as im about 2 fit a us audio amp and kenwood 12inch sub in mine. has any1 removed the tray part at the back and built an enclosure 2 fit it up there 2 minimise boot space lose as im thinking bout mounting it there sumhow. also wat speakers would u recomend 2 fit in the rear parcell self 2 help with a bit of bass. i have the clarions in it at the moment and running a sony dvd player mex-dev1000 thanks in advance. sorry 4 highjackin ur thread

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...