Jump to content
SAU Community

Recommended Posts

I heard that there are some good industrial areas around Melb for practicing driving. They are technically private property as they are off public roads. That means there are no speed limits or road rules on them, right?

The police have no power to regulate driving in industrial areas. Anyone know of any good ones so that one would hypothetically be able to learn to drive manual on without endangering the general public? :happy:

Link to comment
https://www.sau.com.au/forums/topic/222528-industrial-areas-for-practicing/
Share on other sites

i learnt how to drive on my L's here. It was always full of learners driving around in a clockwise direction at 5km/h :happy:

Trucks also used that area for their training.

I dont think that area exists anymore?

http://maps.google.com.au/maps?f=q&hl=...mp;t=h&z=17

Hmm... I wonder how much it would cost to buy a piece of land out in the sticks and just put bitumen on it. Wouldn't be that expensive. In the sticks not too far away from Melb barren land costs like $1000/ha I heard. Add another few thousand and the thing's a racetrack. Or just keep it like that and practice drifting on the dirt :happy:

I reckon SAUVIC could do it. Have our own personal racetrack with no entry fee nor time limits, etc. Would probably only cost each person who regularly uses it $100-200. That's cheaper than 1 track day.

you just need to find a bit of an empty road like a new estate or something, thats where i used to practice to drive manual because it was empty and i didnt want to stall it all the time or stuff up with other cars all around me.

edit: depends what your practising i used quiet roads for learning to drive manual but if you want to practise other things than maybe a drag strip or circuit would be a good idea or a skidpan.

i learnt how to drive on my L's here. It was always full of learners driving around in a clockwise direction at 5km/h :happy:

Trucks also used that area for their training.

I dont think that area exists anymore?

http://maps.google.com.au/maps?f=q&hl=...mp;t=h&z=17

Looks awesome... pity it's a Starbucks now :D (just j/k)

i learnt how to drive on my L's here. It was always full of learners driving around in a clockwise direction at 5km/h :happy:

I dont think that area exists anymore?

http://maps.google.com.au/maps?f=q&hl=...mp;t=h&z=17

Yeah, I learned to drive there too.

Nope, doesn't exist any longer. Was driving on that road just the other day and suddenly though "What the hell? Where am I?" -- sucks.

I think everyone in the south east learnt how to drive there. haha

What's going on there now? I live so close to it, but haven't seen that area for a few months now. Looked like they were building a road to somewhere when I last saw it. Eastlink?

Just buy yourself a large warehouse and go nuts inside it!

Lol two things I see wrong with that video...

1. He is probably getting carbon monoxide poisoning with no ventilation. At least put the roof up on the convertible!

2. If he smashes into one of the weight-bearing pillars.....

did all my L-plater practicing down in the business parks in scoresby, at the bottom of Ferntree Gully road. great place. lots of roads. a round a bout etc. go there on a saturday and it's chockers with learners!

post-9156-1212667414_thumb.jpg

Hmm... I wonder how much it would cost to buy a piece of land out in the sticks and just put bitumen on it. Wouldn't be that expensive. In the sticks not too far away from Melb barren land costs like $1000/ha I heard. Add another few thousand and the thing's a racetrack. Or just keep it like that and practice drifting on the dirt :happy:

I reckon SAUVIC could do it. Have our own personal racetrack with no entry fee nor time limits, etc. Would probably only cost each person who regularly uses it $100-200. That's cheaper than 1 track day.

i work in road construction and let me tell you bitumen and ashphalt are very expensive... one twenty tonne truck load is easily over $10k

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...