Jump to content
SAU Community

Recommended Posts

Coilpacks on a 32 gtr are same as series 1 gtst yeah? Packs on my gtst break down at about 10psi. If i was to buy a set of coils off an r32 gtr that held 18psi would this solve my problem? Obviestly splitfires are a better option but just wondering if i can get outta it a bit cheaper for time being using GTR coils.

thanks guys

brett

Link to comment
https://www.sau.com.au/forums/topic/222667-coilpacks-q/
Share on other sites

are your plugs gapped to .8? if not buy some new plugs allready gapped to .8 and fit them first

yeah thanks mate, already gapped to .7 and got new irridiums. definatly the packs breaking down. taped em up and it helped a bit but not huge amount

brett

Link to comment
https://www.sau.com.au/forums/topic/222667-coilpacks-q/#findComment-3924117
Share on other sites

Yes, 32GTR and 33 Gtst S1 are the same coil packs.... think the splitfire # Is DIS-0001 or something.... around 400 ish these days for new ones, I wouldn't bother stuffing around with second hand ones. .. might find they have the same issues...

JJR ones are $399 a set but I have not had any experience with theirs.. most opt for the splitfires. Or genuine... think it works out around the same price if you have access to a trade card :)

Link to comment
https://www.sau.com.au/forums/topic/222667-coilpacks-q/#findComment-3927400
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...