Jump to content
SAU Community

Recommended Posts

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

who ever wnats this the most im happy to give $600 to help buy it i only want the F&R brake set up

if the car doesnt sell i will sell the brakes to u, but u have to take them out ur self, but do u want the brake calipers or the disc it self? i will get the prices for them and lower it for u

for my drifter

i want F&R:

Hubs

rotors

calipars

pads

uprights

LCA's (dont think i need them but i will check)

Fair enough looks like most of the susp will maybe have damage in it

after my homo mechanic screwing me around (it sounds wrong i know) i need the front rotors, calipars and pads thats all PM how much you want for them?

ill get back to u on that

after my homo mechanic screwing me around (it sounds wrong i know) i need the front rotors, calipars and pads thats all PM how much you want for them?

ok i got u the prices.

pm sent

Edited by skyline-driver
Yeah sure ??? My bullshitometre just went off the scale................. :(

Agreed, I put an R32 into a guard rail at 110km/h, it's LITERALLY suffering panel damage, nothing more.

If this car is the result of a 50km/h accident, either it was bullsh1t and you where going faster, or the car is an absolute rust bucket and the rust has weakened it by about 300%, meaning your not selling a car here, your selling a RUST.

B.

Agreed, I put an R32 into a guard rail at 110km/h, it's LITERALLY suffering panel damage, nothing more.

If this car is the result of a 50km/h accident, either it was bullsh1t and you where going faster, or the car is an absolute rust bucket and the rust has weakened it by about 300%, meaning your not selling a car here, your selling a RUST.

B.

it happened lets drop it

mate $1800 max.

i crashed my car side on into 3 poles at 80kmph and only pushed the whole side in 5- 10 inches, and didnt damage the roof.

u would get a lot less shit if you were honest, plus everyone on here now knows ur a bullshitter.

and by the way BR32-GTR, you would be better off with M-Spec Brakes as they are bigger then the standard gts-t brakes on his car.

and the only reason wreckers sell stuff for more is they have to make a profit of the items to stay open

umm, my car is on ebay now wen its finished ill sell the car immediatly. dont wanna waste my time selling the parts unless u com and get them. now the half cut on ebay i saw is going for $1890 and not sold, im selling the front and the back and the side. so its shod get more than $2000 at least. but im the one who had the accident and im the one who went to hospital and also my GF and her friend broke her nose. now please stop annoying me. and be professional. the accident happened and i paid for it very dearly

and by the way BR32-GTR, you would be better off with M-Spec Brakes as they are bigger then the standard gts-t brakes on his car.

my friend has the r32 gtr and the brakes are same on gtr and gtst im very sure of that however the gtst brakes at the back are smaller than gtr. but the front are the same due to performance

my friend has the r32 gtr and the brakes are same on gtr and gtst im very sure of that however the gtst brakes at the back are smaller than gtr. but the front are the same due to performance

LMFAO

the brakes on a R32 GTR are bigger then a R32 GTS-T M-Spec

and the brakes on the M-Spec are bigger then yours.

its like 10-15mm difference between GTS-T and GTS-T M-Spec

and like 5-10mm difference GTS-T to GTR

the back brakes are the same size

my friend has the r32 gtr and the brakes are same on gtr and gtst im very sure of that however the gtst brakes at the back are smaller than gtr. but the front are the same due to performance

NOOB,

GTR - GTS-t BRAKES ARE NOT THE SAME 280mm Ribbed ROTORS GTS-t/Z32 296mm SMOOTH ROTOR 32 GTR/33 GTS-t

ok , if u say so :D

the auction on ebay is ending very soon. and it doesnt look like its gonna sell. how ever i have 35 people watching so lets wait and see.

if the car doesnt sell. i will give it to my friend who is a wrecker and strip this apart and sold in separate parts

so far

engine will be sold for $1500

front rotors and calipers $ 380

steering wheel $70

seatbelt buckles $45 each

these items are sold

available parts:

spare wheel

carpet

headlights and indicators

speedometer

seats

back lights with components

back bumper vs bx

wheels

side mirrors

guards and quarter panels

driver door the whole thing

sunroof components

climate control

glovebox

rear diff in perfect condition

standard exhaust

back structre panels if u have a car hit from the back

rear window and backside windows

fuel tank

about 50 litres Vpower racing fuel at $1.40 a litre very cheap

other stuff will come out as well see what happens

these parts can be shipped how ever the the door is a pick up only item and the fuel of course

PM me on any parts u need with an offer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...