Jump to content
SAU Community

Recommended Posts

Hey,

My GTS4 is now only running on 4 cylinders and i dont know y?

i was thinkingmaybe 2 of the coils were stuffed but i dont know how to check them, i know the sparkplugs are near new so dont think it will be them as theyre denso iridium ones aswell

any help appreciated, cheers

Link to comment
https://www.sau.com.au/forums/topic/224893-rb20det-running-on-4-cylinders/
Share on other sites

ive had a rb20det with the same issue it end up being the resistor box for the 1st and 2nd injector. wriggle the wiring harness going into it and see wat it does.... either way the fix was a new res pack as soon as it was plugged it all fixed. just check that aswell

ok sweet, ive just had my mate over and we checked all the coils, turns out that Coil #2 was shot, so now im looking for a new coil. hopefully that fixes the problem

if not ill be back here for some more help

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can probably break everything and any point that's true. But with the "precautions" of building the entire engine and everything around it and with a solid tune I wouldn't expect that to happen right of the bat. 😛 
    • You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
×
×
  • Create New...