Jump to content
SAU Community

Recommended Posts

So I am about to buy a skyline:

v35 skyline coupe, 2003, model, silver,premium edition, 25,000kms 18inch stock rims

pretty muuch a stock car, with a few extra such as rear and side cameras, overall pretty good condition.

advertised for 33k, I can get it for 31k, good deal?

nehting I should look out for/traps before I fork out the cash, plus neone recommend a a good bank for car laons for imported vehicles?

cheers,

Danny

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/
Share on other sites

The one thing I stress to everyone looking at imports - judge the car for what it is and ignore the km's.

On the above that car has travelled approx 4600km a year. Given it's not a super rare or special car in Japan, how many people you know in Australia that buy a Commodore and only travel 5000km's a year in it?

Unless it's got log books, I would ignore the k's and look at the condition.

Other than is at an auto? It seems like a typical price for an auto, however if manual it would be a fantastic price.

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3964093
Share on other sites

i think its a good price regardless of auto/manual

its pretty rare to get the reversing camera which is over 1k to add on yourself

plus it menas you have the nav screen and everything...

if its a dealer, look to get ait for around 30k, if its private sale, then there's usually not as much movement possible

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3964220
Share on other sites

The one thing I stress to everyone looking at imports - judge the car for what it is and ignore the km's.

On the above that car has travelled approx 4600km a year. Given it's not a super rare or special car in Japan, how many people you know in Australia that buy a Commodore and only travel 5000km's a year in it?

Unless it's got log books, I would ignore the k's and look at the condition.

Other than is at an auto? It seems like a typical price for an auto, however if manual it would be a fantastic price.

why do you say km's dont matter? Woldnt that be a factor to be considered when judging the overall condition of the car?

with these imports, Are the cars km's actually legit? or do you think they've been manipulated some how?

cheers,

Danny

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3964681
Share on other sites

i think its always fair to assume ANY import has had the kms played with

its just that with a newer car like the V35 its not going to make much of a difference as is so bloody new anyway!

as long as the car seems in good overall condition, and the engine checks out ok with basic inspection, rest assured you will be fine 99% of the time

Edited by WazR32GTSt
Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3964780
Share on other sites

i think its always fair to assume ANY import has had the kms played with

its just that with a newer car like the V35 its not going to make much of a difference as is so bloody new anyway!

as long as the car seems in good overall condition, and the engine checks out ok with basic inspection, rest assured you will be fine 99% of the time

yep exactly.

It's more important to have the condition of the car checked then to say it has 10000km's so it's a brand new car in great condition.

My point was to highlight that alot of people use km's when judging a car, and unfortunately with imports unless there are log books, everyone involved with them will agree that km's are almost always altered.

Common sense plays a large part, and people who think that in japan no one drives their cars and they just sit in the garage are kidding themselves.

Personally with both my V35's i stayed away from any car which had less than 10000k's per year. Not because i knew they were changed, but because they didn't have log books.

Again the V35 is not a super rare sought after car in Japan that someone would buy to sit in the garage. With space costing so much $$'s in Japan you can bet that someone who pays for garage space is going to use the car. And based on this i simply don't believe a 5 year old car would only have 10,20 or even 30 thousand k's.

Just my view.

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3964920
Share on other sites

yep exactly.

It's more important to have the condition of the car checked then to say it has 10000km's so it's a brand new car in great condition.

My point was to highlight that alot of people use km's when judging a car, and unfortunately with imports unless there are log books, everyone involved with them will agree that km's are almost always altered.

Common sense plays a large part, and people who think that in japan no one drives their cars and they just sit in the garage are kidding themselves.

Personally with both my V35's i stayed away from any car which had less than 10000k's per year. Not because i knew they were changed, but because they didn't have log books.

Again the V35 is not a super rare sought after car in Japan that someone would buy to sit in the garage. With space costing so much $$'s in Japan you can bet that someone who pays for garage space is going to use the car. And based on this i simply don't believe a 5 year old car would only have 10,20 or even 30 thousand k's.

Just my view.

Cool thanks guy,

Also you reckon I should get one of those NRMAS checks even if Im buying from a small dealer/importer? Cause by law they need to provide a statuory 3 month warranty am I correct?

I'm not exactly a car expert.

Im also having trouble with finance, I've rang a few major banks and they dont support imported secured car loans, any suggestions? One of them suggest go through the dealer/importer to organise it, but Im not so sure. My other option is a personal loan, but the rates are too high, might as well not buy a car.

Any experiences?

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3965144
Share on other sites

my advice..

dealers have to provide a 3 month warranty but many offer extended warranties

and on the finance issue.. my honest advice is that if you need finance then don't waste your credit on a car. buy something you can afford. just my opinion, i'm against borrowing for anything other than a house.

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3965180
Share on other sites

Never had a car loan in over 20yrs of driving, i've leased a couple but personally I think If i can't afford to pay for it...I can't afford to drive it.

A car dealer with a 30k car will have between 2-5k of puff in their price..so min 1.5k off.

Private sales are fun, if you're any good you can generally crunch the shit out of the price and get a far better deal than a yard can offer. But never forget Caveat emptor.

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3965200
Share on other sites

Cool thanks guy,

Also you reckon I should get one of those NRMAS checks even if Im buying from a small dealer/importer? Cause by law they need to provide a statuory 3 month warranty am I correct?

I'm not exactly a car expert.

Im also having trouble with finance, I've rang a few major banks and they dont support imported secured car loans, any suggestions? One of them suggest go through the dealer/importer to organise it, but Im not so sure. My other option is a personal loan, but the rates are too high, might as well not buy a car.

Any experiences?

I would get it checked. Pay $500 upfront for check or spend the next 2 years chasing a dealer to repair your only driven for 1 week $30000 car.

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3965381
Share on other sites

The two places Im looking at are either

- Top Motor Imports in Camperdown

- Nagoya Motors in Caringbah

Anybody had any experience with these guys?

I bought mine from Nagoya Imports...they have some very nice examples there. Alex is great to deal with...being in QLD, I actually bought mine from him based on feedback from the NSW section and also tons of pics that he sent me. I took a leap of faith and bought it without any inspection and got it sent up from NSW. Came with 3 yrs extended warranty, 1 yr roadside assist and 3 months rego...and to date, I still can not find another series 2 sedan at a better price with the options I got.

Car was pretty much exactly as described and after being checked by my mech in QLD, it was given a clean bill of health.

edit: I do not advise you to do what I did...if ur in NSW, best get it chked out by a professional :)

Edited by n15m0
Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3965888
Share on other sites

Hi Guys,

I bought mine from Nagoya Motors in Caringbah (NSW) and found them a pleasure to deal with.

I drove the car for a week and heard a clicking from the front end under mid range revs.

Nagoya Motors honoured their stauatory warranty and spend thousand replacing the CVT which had a loose spring. I didnt have the car for 2 weeks but I didnt have to foot the bill so was happy with that :) .

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3966944
Share on other sites

Im also having trouble with finance, I've rang a few major banks and they dont support imported secured car loans, any suggestions? One of them suggest go through the dealer/importer to organise it, but Im not so sure. My other option is a personal loan, but the rates are too high, might as well not buy a car.

Any experiences?

I personally finance my cars because I run a PTY/LTD business and it is the best type of expense to claim so for me my cash is better utilised elsewhere, i.e. in offset accounts, DIY Super or shares (although not right now).

But I suffered the same problems with obtaining finance as these cars are classified as "grey" imports... I have an outstanding credit rating with GE Money as I've had 3 cars through them with perfect repayments and the best they could do and mind you because of my excellent credit rating was 30% deposit upfront with 17% interest.. This I thought was ridiculous and after scrounging the internet for other finance companies, out of interest I phoned St George (I don't work for them) and they did it for me with no quams at 10% over 5 years with balloon or no balloon.

Interestingly they use the Redbook website for their evaluation reports, why don't you check out the value of your car there...

Good Luck!

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3968167
Share on other sites

Im also having trouble with finance, I've rang a few major banks and they dont support imported secured car loans, any suggestions? One of them suggest go through the dealer/importer to organise it, but Im not so sure. My other option is a personal loan, but the rates are too high, might as well not buy a car.

Any experiences?

you can try getting a personal loan as it's probably going to be quite difficult to get a car loan for an import. thing is, the interest will be a bit higher but the bank won't really care what car you buy or generally on what you spend the money on. they're only interested that you can pay it off as it's treated as an unsecured loan. i guess the advantage is that you can finance the whole amount (as long as you can pay) and when you do get the car, there will be no liens on it so you can easily sell it later on.

good luck.

Link to comment
https://www.sau.com.au/forums/topic/225069-good-buy/#findComment-3968189
Share on other sites

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...