Jump to content
SAU Community

Recommended Posts

Hi all

Im only new to this as i just bought an r 33 gtst 4 door. But i put a set of blade rims from bob jane t-marts on and i ended up with a massive chunk taken out of the left front wheel. Tottaly stuffed had to buy a whole new rim cost 395 dollars real annoyed. Anyway when i drive it sounds like a deep whining noise around 50 to 60 ks maybe the axel is bent or just wondering if anyone would know about this. its only done 60,000 ks so nothing wrong with the engine. any help would be great cheers.

scottyboy

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/
Share on other sites

dont actually know what happened but its the front left and i dont think that it is the diff because it is only when i get to a little bit of a higher speed that the noise occurs. i might just have to get it checked out

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/#findComment-3969178
Share on other sites

Sounds to me like you hit soimething which caused the rim damage.

The noise sounds like the impact has "bruised" the bearing. The noise will get worse, and eventually your wheel will probably fall off....this will damage the rim again and you will need to buy a 6th one :)

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/#findComment-3971907
Share on other sites

i sort of agree with bard get your alignment bearings and other steering style stuff checked (cheaper than a new rim)

oh and its ok if you dont tell us about that curb you jumped ( i neglect to mention my motorsports "incidents" all the time)

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/#findComment-3974448
Share on other sites

Wheel bearing gone? Or on its way out?

If this is the case, eventually the wheel will sieze up and not rotate any more.

Pretty easy to replace, pull of wheel, take of the brake rotor, and replace them.

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/#findComment-3975569
Share on other sites

cheers car is going in for a service tomorrow so it will be fixed. i didnt say that i didnt hit a curb i just don't remember doing it. anyway was told by my mechanic the same thanks for the reply

cheers Scottyboy

ps i wasn't drunk as i don't drink. :P

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/#findComment-3982912
Share on other sites

hey was just teasin bout the curb hope it all works out well

i had problems with a vibration at 80-100 kph for ages that i couldnt find (mechanics/ wheel blokes/ suspension blokes either) finally went away when i replaced some stearing bushes when i installed the swaybars go figure

and lets not even go into motorsport "incidents"

luck aye

GWP

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/#findComment-3987573
Share on other sites

na its all sweet now the mechanics that i go to found it. it was just wheel Bearing, but they said that they called nissan in osbourne park and that it was going to cost me 400 dollars because i had to order the hub as well. Anyway they did some research for me and just found the bearing s under 100 dollars so its all good now run s like a charm cheers guys,

cheers scottyboy

Link to comment
https://www.sau.com.au/forums/topic/225253-just-new/#findComment-3989863
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...