Jump to content
SAU Community

Recommended Posts

Hey just puttin an EOI atm seeing whats out there atm NOW FOR SALE!!!! NOW TAKING GENUINE OFFERS

located: Brisbane

price: EOI really atm ...but to keep mods happy around 12-13k NEGOTIABLE

extra info: vehicle does not have rego and needs mod plates, IT IS COMPLIED, and it CAN be plated and regoed though

will also take things off for cheaper sale.

OPEN TO SWAPS FOR CEFIROS LAURELS and R32 4 DOOR

contact: 0411023878 or PM

Engine:

1988 Nissan Silvia - sunroof - HUD

SR20DET VCT Blacktop out of s14 (series 1)

Modified CA18/S14 engine harness

Chipped and tuned ECU

Cometic 1.5mm head gasket

Just Jap front mount intercooler with modified hybrid piping

20 thou oversized forged pistons

ACL big end main and thrust forged bearings

Greddy Type R bov

Custom thermo fan setup (AUIII Falcon thermos)

Just Jap stainless steel exhaust manifold

GT2860rs disco potato w/ .64 exhaust housing

2.5" stainless steel split dump pipe

2.5" stainless steel front pipe

Stainless steel de-cat pipe

3" straight thru pipe to flange with bolt on cannon

Boost tee

K&N pod filter

Walbro Fuel Pump

Engine Dampener

NISMO Fuel pressure regulator

Transmisson:

S14 gearbox

Short shifter

NPC heavy duty 5 puck brass button clutch with a HKS 1200kg pressure plate

Solid gearbox mount

Suspension and Handling:

Solid steering shaft spacer

R180 locked diff

5 stud conversion

F - s14 LCA, S14 stub axle, s14 hub, r32 brake calipers (4 pot) and rotors

R - s15 hubs, s15 rotors, s13 caliper

Adjustable castor rods

S13 steering rack w/ R32 skyline tie rods and tie rod ends with 10mm spacers in rack

KTS Hicas lock bar

Tein HA coilovers with adjustable camber tops

Rear Strut Brace

Interior:

Safety 21 - Full 7 point rollcage bolt in

DRiFT steering wheel

Dildo gearknob

Jap extension mirror

Drift button

FET Turbo timer

Fibreglass door cards

Custom switch panel setup

Killswitch

Fully stripped interior and sound deadening

Interior painted silver

Autogage 52mm Boost gauge

Autogage 52mm Oil Temp gauge

Autogage 52mm Water Temp gauge

Fire extinguisher

Fully sick neons

Exterior:

Genuine silvia square headlights

Xenon headlight bulbs

Black corner lamps

BN side skirts

BN front bar

Vertex rear bar

Flared and pumped rear guards

Clear taillights

F: HP Racing wheels 18x9 tyres: Falken Ziex 235/40/18

R: HP Racing wheels 18x10 tyres: Falken Ziex 255/35/18

25mm bolt on wheel spacers on rear

8mm floater spacers on front

Paint: -Gloss white paint

-Black roof with heavy gold sparkle

show me what you got!!!

thanks

-josh

post-36807-1214268706_thumb.jpg

post-36807-1214268730_thumb.jpg

post-36807-1214268752_thumb.jpg

post-36807-1214268789_thumb.jpg

post-36807-1214268831_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/225281-built-sr20-blacktop-s13/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...