Jump to content
SAU Community

Recommended Posts

i would never want to be a speed camera operator, parking ticket inspcetor, tram/train ticket inspector or accountant...

further, how's the increase in revenue they're expecting to make on the eastlink?!?! 22 cameras over 48kms? seriously... :)

Edited by JMP 82

^^^ agreed 20yrs too late and it's not even a freeway, what a joke.

I like how they're saying it'll change the lives of people from the s.e and e, it'll reduce the amount of money in their pockets thats about it. I have a good question for them: if they hadn't created all that insignificant artwork along the route would we have cheaper tolls?

Plain Roads, Normal bridges...screw the rest. IDIOTS!

First time I use it I might even do a burn out "of derision" on the entrance ramp then one of "disgust" on the exit ramp.

That'll learn em and learn em good :O

Edited by madbung
^^^ agreed 20yrs too late and it's not even a freeway, what a joke.

I like how they're saying it'll change the lives of people from the s.e and e, it'll reduce the amount of money in their pockets thats about it. I have a good question for them: if they hadn't created all that insignificant artwork along the route would we have cheaper tolls?

Plain Roads, Normal bridges...screw the rest. IDIOTS!

First time I use it I might even do a burn out "of derision" on the entrance ramp then one of "disgust" on the exit ramp.

That'll learn em and learn em good :D

yeah it will when they send ur plate to the cops 5min later. surveillance cameras all over.

when I was looking through them at a control centre demo last week they seemed pretty real to me.

Unless they've invented skyhooks, the infinite zoom (with a dead straight flat road) or geo static satelite they're not covering 47klm of toll way are they?

The so called dandy drag strip for example? spy cameras mounted on fake cows perhaps?

Somehow I have a doubt or 2.

Edited by madbung
Unless they've invented skyhooks, the infinite zoom (with a dead straight flat road) or geo static satelite they're not covering 47klm of toll way are they?

The so called dandy drag strip for example? spy cameras mounted on fake cows perhaps?

Somehow I have a doubt or 2.

Not sure where 47klm or the dandy drag strip has to do with the on and off ramps as per the origional post.

Unless they've invented skyhooks, the infinite zoom (with a dead straight flat road) or geo static satelite they're not covering 47klm of toll way are they?

The so called dandy drag strip for example? spy cameras mounted on fake cows perhaps?

Somehow I have a doubt or 2.

they dont need to cover all of it with perfect zoom, they can see what you are doing with a long shot, follow your car with the camera and then you will find that just before or at every exit will be a toll point full of cameras that will snap your plate perfectly, add the camera tracking shot and the pretty snap of your plate and you are done sunshine.

You do realize that the term "big brother" was not invented by channel 10 dont you??

they dont need to cover all of it with perfect zoom, they can see what you are doing with a long shot, follow your car with the camera and then you will find that just before or at every exit will be a toll point full of cameras that will snap your plate perfectly, add the camera tracking shot and the pretty snap of your plate and you are done sunshine.

You do realize that the term "big brother" was not invented by channel 10 dont you??

Haha what a classic you are.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...