Jump to content
SAU Community

Recommended Posts

Hi all,

It's the same old story- I'm using the standard R33 airbox but I've got a front-mount intercooler. So, no snokel for me.

I was considering buying something like this from nengun:

http://www.billion-inc.co.jp/billion2006/A...nel/Funnel.html

but I figure it would be cheaper (and quicker) to make my own.

So, where is the best place to get 100mm unlsotted (no little holes in it) ag pipe? None of my small, local hardware shops have it.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/225772-where-to-buy-ag-pipe/
Share on other sites

Hmm, not a bad idea. Only thing is I'm not sure how I'd go about bending it to suit my setup and still maintaining the pipe diameter. Going to need to have a few bends- planning to use the holes from the old side mount intercooler to feed to airbox.

the stuff im refering to is ridged like the AG pipe, just in alloy. so it bends and retains its shape pretty well.

the one thing is how to mount it without crushing it as its stiffness is lower than AG pipe- but the benefit is its easier to get tighter bends.

still - even the normal ag pipe with small holes in it will provide additional airflow regardless, and less chance of water build up in wet weather.

  • 2 months later...
Hi all,

It's the same old story- I'm using the standard R33 airbox but I've got a front-mount intercooler. So, no snokel for me.

I just replaced my intercooler with a blitz lm return piping cooler, just jap stealth intercoolers are the same configuration but cheaper.

bunnings, reese, burdens, (plumbing shops) will all have 100mm ag, in 10m rolls

-may be able to buy a metre or 2 from a plumber in the car park rather than buy a whole 10mtr roll

Purple Pig & pirtek, may have something similar but will be more $$$$

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...