Jump to content
SAU Community

Recommended Posts

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Ha ha. All done!!!! YAY!!!

Finished off all the little crappy stuff in the engine bay and under the car then at 4:30pm finally ran it on the starter to get oil flowing. Could hear every cylinder, nice.

Then started it for real, fired into life after 3 seconds : )

Drove to the servo and loaded it up on the way there and back, with the waste gates free so no boost to help bed in rings.

Came back, dropped the oil and put more mineral oil in and changed filter and hooked waste gate rods back up. Went for another drive, nice! Good to be driving her again.

Only problem may be that I need a new idle control valve :( as the engine revs (flares) by itself continuously at idle.

Sounds throatier than before too.

post-12712-1221993103_thumb.jpg

post-12712-1221993130_thumb.jpg

post-12712-1221993167_thumb.jpg

post-12712-1221993197_thumb.jpg

post-12712-1221993231_thumb.jpg

Cheers

Thanks :(. In the end I think I owe myself 5K+ lol. Great experience, and knowing the fact you built it yourself!

Well, on the stock bottom end it was putting out 350RWKW on 17psi. So I'd be happy with the same amount (read 500hp atw). Mainly due to he stock gearbox, and I built it to handle the power reliably without worrying about what the bottom end is like.

Went for a drive tonight, and it's really smooth and sounds gutsy lol. I'm only taking it to 4500 to 5000 at the moment at part throttle. Put 110k on it lol.

I'll book it in for a tune once it's got some kays under the belt........we'll see.

great work sean!

looks nice. and i love ur display pic. car looks smooooth as!

cant wait to see the dyno results. sounds promising!

Cheers. They really like taking your money lol.

Unplug it. Need to meet up for a cruz soon when i get my car back.

I'll try it out Brad. I also need to make another dummy load for the hicas solenoid I pulled out of the engine bay to stop the computer thinking theres a fault.

Cruise, for sure. I'll do the Putty cruise in October now :banana:.

Damn Sean, very nice and very fast work - fkn great effort!!

going to bug you for a ride in it soon if i get a night out i'll bring the SLR and take some shots!

Thanks Chris. The engine covers you did for me look awsome with the polished stuff so kudos to you. When we get a chance (read time off from busy schedule) for sure.

unreal sean. ive booked the gtr in for tune weekend after the long weekend at uni group. so will all have to go for cruise very soon. i just need front bumper now!!!!!!!!!!!

I'm glad it's done. Now done over 200k, and it's smooth as. Will be great when you get yours tuned.

I'd also like to thank everyone who gave some advice and imput on how to go about doing this project. 3 months seemed forever to me but it was pretty quick in the end.

post-12712-1222094499_thumb.jpg

Okay! Put 1200km on it so far, changed oil and filter again at 1000k and check up and tune on dyno is booked for tomorrow morning (only good thing about shift work lol). Gonna check a/f ratios etc, to make sure it's happy when I use the upper end of the rev range :P .

It has a pretty beaty, cammy idle, only using 12psi to be safe lol. I guess I'll have to check nuts and bolts are tight too etc. Twin plate clutch is great compared to the triple I had for the street.

Also the engine has no slap or rattles when started and warming up. Engine builder I took the block and pistons to, recommended running piston to bore clearance at 3.5thou so I'm happy.

Edited by GTRsean
Congratulation Sean..

Amazing how quick the build was done mate specially with work space..

Looking forward to updates.

Cheers :(

Okay, got it dynoed and cleaned up this morning. Found a couple of things. The fuel reg might need changing as it's a bit sus when revs are high at full load, more fuel was added to compensate but not too bad as it's on min 11 PSI boost anyway. Ordered in one from nissan. It idles at 1400RPM, idle control valve is letting too much air through(o ring inside is non existant), and I cleaned the throttles :D even though I read a topic about not to do that years ago!! It takes the sealing coating off the inside of the butterfly to bore seal.

Other than that, all good and since cam timing is sweet the gaph is great. It'll go back to the dyno in 2000km to get a high boost tune lol.

post-12712-1222827842_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
×
×
  • Create New...