Jump to content
SAU Community

Recommended Posts

R32 Gts-t with R33 Rb25det engine and gearbox

Raws car

Auction grade 3.5 car

80,000 on the 25 package

motor was rebuilt with new rings and bearings before fitting 2,500km ago

VG30 op6 Turbo (larger rear housing same as r34 gt-t)

New Arp headstuds

New timing belt

Tomei 256 Intact cam

New Tomei 1.2mm metal headgasket

New front mount intercooler

New extreme heavy duty clutch

New D1 strengthend shifter (same through just more postive feel)

New Section rear camber arms

New Kts tie rod ends

New Ikea Formula tie rods

New Kenwood head deck

New Alloy Steering bush

New Nolthane Steering rack bushes

New front Brake pads

new clutch master cylinder

Ikea Formula Traction rods

Non Hicas S13 rear craddle

full exhaust turbo back

Apexi pod filter

Alloy craddle bushes

Buddy club front coilovers

G master rear coilovers

rear strut brace

R33 Gtr rims 17 x 9 +30 all round

Gtr fuel pump

all new fuilds engine oil, brake fuild, clutch fuild, gearbox oil, diff oil all changed 2,500km ago or less

Alarm , keyless entry

Price: $12500.00 ono

call me on 041 1152733 with any offers questions

post-15018-1215218266_thumb.jpg

post-15018-1215218277_thumb.jpg

post-15018-1215218291_thumb.jpg

Edited by 1400r

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...