Jump to content
SAU Community

Recommended Posts

1. Greddy Catch Can - Rectangle Type - Comes with some hoses. Good Condition. 600ml I think

$80

2. ORC Clutch to suit S13/4 - Ogura Racing Clutch 409D Super Single Clutch with Flywheel.

Single Plate clutch with ORC flywheel.. around 65-70% meat left on it.. retails for over $1400..

$500

3. Nismo Gmax Twin Plate Clutch to suit Rb20/25 5 speed. Comes with Nismo Flywheel - around 45% meat left.. can Hold over 300rwkw & has the ability to be rebuilt locally saving you the hassle of buying another $2000 clutch.. Clutch kit retails for around $2,400.

$350

4. HKS Inlet Cam Gear to suit SR20 - Brand Spanking New.. never used, Ever. Retail for $190ish..

$130

5. HKS Exhaust Cam Gear to suit SR20 - used for 5,000km. retails for $190ish...

$115

6. DRiFT Pod Filter - Small type for confined spaces.. Good flow, still very clean - $25

7. ARC Rad Cap - 1.1 Bar - used for about 10 seconds.. $30

8. Coustic Sub - 12inch in Ported Box - PICK UP ONLY - $45

9. 2x R32 GTST stockies - 16x6.5 fitted with 225/50/16 Continentals with around 70% tread

$100 - PICK UP ONLY

Prices are Semi Negotiable - PM me for any more details or call me on 0402 813 018

Located in Sydney - North..

If you want to meet up for parts be prepared to drive to the Northern beaches or a surrounding suburb.. Im not meeting anyone half way to Liverpool or Camden or anything..

PM's Replied. be quick Kids... If you want something then call me as I give preference to anyone who is genuine enough to call me opposed to sending me a PM

Nismo Clutch - Sold.

ARC rad Cap - Sold

Greddy Catch Can - Sold

Edited by Shypo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...