Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

production has already started . Hopefully a couple of weeks away.

Sweet, thanks mate, could you give me a heads up when they arrive???

ta!

well vi-pec was installed on monday just base tune map as dyno was busy .

car was dyno'd on tuesday and it makes similar power to the mines ecu i had in it

am extremely happy with the autoworx sales and service and am wrapped with lumpys tune

it still needs a bit more of a tune once i have found a stock 32 r boost solenoid as the bleed vleve in mine boost drops from 15 psi @ lower revs down to about 11 psi @ peak

YAYYYYYYYYYYYY no more AFM's to worry about

If you can't find the solenoid let me know. I have one at home you can have.

You've got an Rb20 solenoid??

Mark... its not the RB20 solenoid you're after, its the RB20 wastegate actuator :banana:

Edited by NISZILA
  • 1 month later...

woot woot :D

might call in early next week and pick one up

would you have the stock na rb25 neo map for it? I might plug it in before i do the conversion to see what the old na can pump out haha

finally got tune for boost and launch control done

dyno sheet

img013.jpg

it boost was deliberately tapered off at the top end to stop the turbos over spinning and killing their frail 14 year old ceramic insides

very impressive result given its a basically stock 32gtr!

have you had a chance to try launch control?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...