Jump to content
SAU Community

Driver Dynamics Sandown Trackday Saturday 2nd August

kevwrx

By kevwrx,
in Archived Events

 Share

Recommended Posts

kevwrx Proficient

kevwrx

Posted
Posted

We will be running the day as an 'open pit lane' day, but we will also have 4 qualified (Certificate 3 and 4) instructors with lots of experience.

Our regular instructors include - Two times Konica V8supercar champ Dean Canto, 2004 Australian Sports Sedan Champion and outright Sandown lap record holder Darren Hossack, 2007 Porsche Carrera Cup Champion Dave Reynolds, 1998 Australian Formula Ford and 2005 Konica V8Supercar Champ Adam Macrow.

We also provide lunches, tea / coffee / soft drinks , flaggies and Racesafe medical / rescue crew.

Typically on one of our trackdays you'll get around 200+ kilometers of track driving for the day.

You do not need a CAMS or ASSA licence to participate in our High Performance Training and Track Driving Days.

You also dont require any special mods to your car for our days.

The format we run to is: 3 groups of fifteen drivers, twenty minutes of track time per hour.

Start time is 8.30 am for safety briefing, track is open from 9.00 am until 4.00pm.

Call Tessa during office hours to book your position 1300 652 693

Cost is ONLY $225.00 per driver.

No further discounts will apply for this course

post-3810-1215947276_thumb.jpg

Rav Proficient

Rav

Posted
Posted

It be good to see some face's from the forum there. Ill be in my 32GTR so come and say hi.

Do you rekkin people can come to watch, Because i wouldnt mind if i could get some pictures on the day.

GtstCoupe Proficient

GtstCoupe

Posted
Posted

I am very interested :D, I have never been to one so any info would be great ,do we need to bring helmet or is it supplied,

and do you need to a have a fire extinguiser fitted in the car.

And can you bring a friend lol

:D

Rav Proficient

Rav

Posted
Posted (edited)

They told me you can bring a helmet or they can supplie you one one the day, fire extinguiser they said you dont need one.

I know you cant have any one in the car with you, But to watch iam not sure.

Edited by Rav
Slik_LA Enthusiast

Slik_LA

Posted
Posted
They told me you can bring a helmet or they can supplie you one one the day, fire extinguiser they said you dont need one.

I know you cant have any one in the car with you, But to watch iam not sure.

I did the track day on the 12th of July and you can have as many spectators as you like. So take your camera crew with you. They allowed us to have a passenger hot lap on the day which was good too. I'm not sure if that's something that happens all the time or not. Anyway it was a good fun day and you get to drive your car as fast as you can

I know I did :)

Have fun guys

locoloc Community Regular

locoloc

Posted
Posted

Hi....what is it that you get taught, as ive never done any track work and have no idea what to expect.....

Also what am i most likely going to need to replace after the day???

( tyres, brake pads? oil change??)

cheers

llama_au Grand Master

llama_au

Posted
Posted

^^^none of the above pending the condition of each before you go there. Make sure you have plenty of tread on your tyres, plenty of meat on your pads and that you're up-to-date with a service. It never hurts to change oil before and after a track day though. Be very careful not to put your handbrake on in the pits or you'll be very likely warp your rear rotors :blink:

They teach you when to begin breaking, what lines to take through a corner, when to accelerate again and when to change gear. It's a very informative and enjoyable day, you'll want to go back.

Rav Proficient

Rav

Posted
Posted

(QUOTE) Be very careful not to put your handbrake on in the pits or you'll be very likely warp your rear rotors.

Thanks for the tip i didnt know that and i would of put my handbrake on 110%. :blink: .

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • MBS206
      What accelerator cable can be used with greddy plenum

      By MBS206 · Posted

      Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...