Jump to content
SAU Community

Recommended Posts

in the morning when i turn my car on..(infact anywhere where the car has been sitting for more then 30 mins off) theres a ticking comming from my bay, but only at around 2500>3000, not when its idleing, i pop the hood to find its comming from the front of the block, on the right side (turbo side) of the rocket cover when i rev it.. after driving for about 10 mins it goes away, what the hell is this..is it serious? thanks for reading :) car: R32 GTST 1992

Link to comment
https://www.sau.com.au/forums/topic/228428-weird-stupid-noise-heeeeeelp/
Share on other sites

Skylines and engine bay noises, do search...

When were your timing belt idler and tensioner pulley's last replaced? I've had this issue, I reckon i was a few weeks away from a seized bearing, overheated and snapped timing belt :)

Sure its not your injectors? If you race the motor, does the noise disappear on the decel? What oil and when was it changed last?

Regardless, poke about the engine bay with a long screwdriver on your ear.

i change oil every 3000k's, it started actually after switching from valvoline to caltex synthetic oil....timing belt changed at 93 000ks, its done 132 000 now..

lol sorry i tryed search b ut came up with similer issues but not the same, it ticks only wen i accelerate,, then it goes away completely... its perfect at idle..

Edited by SXCR32

Check your starter. There is a thing called "the clicker" it is known as this because, well, it clicks. When you start the car it should click for about... oh, I would say 10 minutes max when running. Normally it is out of 2nd gear as well because the engine is warmer. Then the clicking is better on warm days etc. That could mean a bad starter. That is why they make it like that. X__X;;

Happend to me and I ignored it, then I got stuck in the middle of nowhere.

Just something to ponder mate.

If this IS the case, don't replace it. It can be repaired for like 25$ easy. Take it to a shop is all.

Edited by AKW

since it was after a oil change i would also have to go with a lifter. get this a bit at work. when you change the oil and put a new filter on you induce a fair bit of air into your engines oil gallerys which can enter a lifter pretty easily, usually it will go away after a bit of driving. if not, lifter could possibly be on its way out...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...