Jump to content
SAU Community

Recommended Posts

hey guys, pretty new here

anyway got a rb20det manual cefiro just finishd conversion.

i trying to start car and there is no fireing at all.

i checked for the constant 12v on center pin on coils it has that but i pulled coils out and put screwdriver down them earthed and tryed to fire unfortunitly no spark there either.

i have changed the relays next to ecu no change.

have tryed numerous amounts of ignitors.same problem.

can any body help me out am going to test for power off ignitor loom later today will post how i go need help asap. also car is getting fuel so no problem there.

Link to comment
https://www.sau.com.au/forums/topic/228950-help-please-no-spark/
Share on other sites

ok i changedd all grounds etc an now we have spark,fuel but its just cranking and not firing at all im stumped .

ive tryed different ignitors upped fuel pressure ,pulled cas sensor out turnd and injectors clikt etc so thats fine.

i done a diagnostic check and it came up with 21 ignition signal.

can some one please help i need to get this thing going so i can go show some form to the ladies down the street hahaha

alright!! good news i put a bolt in the return and blokt it she fired up straight away so we know i have low fuel pressure even the its getting gas.i have replaced standard rb20de pump(car was originally rb20de auto) i replaced it with a twin turbo subaru fuel pump.why is this not giving enough pressure if the pump is biggrer and pumps more than the standard one?

i have a sard fuel reg.gas feeds threw bottem out the side and is in the hose that comes off fuel filter.
It's supposed to be on the return line off the end of the fuel rail. I should probably feed into the side and out the bottom. It's designed to maintain a given pressure in the fuel rail (it's not the actual pump that causes the fuel pressure).

What pressure is it set to maintain?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 馃憣). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
  • Create New...