Jump to content
SAU Community

Recommended Posts

I have been building up my R33GTST sedan for a few years now, its recently had an RB26 & manual conversion and just this week a single turbo/injectors (Trust TD07 & sard 700cc) upgrade and goes in for tuning to matt spri @ PITS next week. So after this is done and ive had a bit of fun with it i am looking at selling it on but i dont know what i should be asking. I have made a gallery with some pics .... http://www.skylinesaustralia.com/forums/ga...-album2709.html

Would anyone be interested in sharing their thoughts on its resale value? i can do up a detailed list of all modifications if anyone is willing to take the time to review it.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/229180-whats-my-skyline-worth/
Share on other sites

The kit and wheel is not to my taste. But others might like it.

Nice color thou.

Which year and series?

Any other work done to the engine? If not, I'd say about 18k - 20k max.

With a rebuilt motor, probabaly a little bit more.

The kit and wheel is not to my taste. But others might like it.

Nice color thou.

Which year and series?

Any other work done to the engine? If not, I'd say about 18k - 20k max.

With a rebuilt motor, probabaly a little bit more.

the wheels arent my thing really either but they were a steal at a grand with rubber & the kit well being 4 door there is not much available, that had to modified to fit as it was. Its 1993 series 1 ..

The engine is stock except for the work ive just done, its running power FC and a few bits (intercooler, fuel pump, cam gears etc)

Id strip it down and sell off the parts, would probably get a little less money but would be easier then trying to sell it to someone who would drive that over compensated lollypop-mobile.

They say beauty is in the eye of the beholder but then again some people have a fetish for animal porn or grannies.

Id strip it down and sell off the parts, would probably get a little less money but would be easier then trying to sell it to someone who would drive that over compensated lollypop-mobile.

They say beauty is in the eye of the beholder but then again some people have a fetish for animal porn or grannies.

haha i guess everyone has their opinion and im not scared of some negative feedback, but if we could keep it to helpful replies it would be appreciated.

haha i guess everyone has their opinion and im not scared of some negative feedback, but if we could keep it to helpful replies it would be appreciated.

Jst making some fun man, i went through my stage of 'flasshy' as well (bout the same time i bought my first pink polo top)

Try popping it on carsales.com for a few months and after that, try parting it out!

yea its all good, i have the unique ability of being able to laugh at myself, i figure if you cant laugh at yourself you probably deserve it. I guess the car ended up the way it has because i know people in the car audio/bodyworks industries .. if i had more mates in the performance areas things could have turned out a lot differently but as it is to get any sort of decent performance work its a 2 hour drive to brisabane or 3 hour drive to the goldcoast ..

It'll be worth more stripped in parts.

You'll be lucky to get over 25k for that as it is IMO. Stock RB26, which will die eventually, and actually brings the engine bay down because its a typically worn looking RB26. If it has a decent spray on the covers, plenum etc it might help a bit with its appearance.

Also because of the colour in all honesty, its not for everyone so you'll have to wait around for a buyer with something that focused etc... longer you wait, the more money you loose on it all so you bite the bullet or have a deeper side pocket.

Strip it now, put a stocker RB25, rip out the stereo etc etc then sell it up with just the bodykit and the spray.

Id strip it down and sell off the parts, would probably get a little less money but would be easier then trying to sell it to someone who would drive that over compensated lollypop-mobile.

They say beauty is in the eye of the beholder but then again some people have a fetish for animal porn or grannies.

says the popsicle who runs his car around at night with the bonnet popped on the secondary - go figure......

mate it will appeal to someone I am sure, looks pretty neat and as long as the 26 and manual conversion was done correctly and the motor is strong, someone will give you pretty good money for it. I would agree that you would need to look pretty hard at offers close to the $20k mark as good money.

GL with the sale

The engine has just all been cleaned up, while the turbo was being fitted i had the covers/plenem painted, fitted aluminium radiator, silicon hose kits, cam gears/clear cam cover .. so in all the bay doesnt look too shabby now, but this is the sort of things i wanna know thanks.

Those wheels & rear spoiler completely embarrass the car... The rims are made for someone from Coburg with an auto VL n/a 6 with neons and the back spoiler is for a GTR.

Put some gold forged BBS 18x10inch BBS's on it and take off the wing... and then keep it :blush:

Those wheels & rear spoiler completely embarrass the car... The rims are made for someone from Coburg with an auto VL n/a 6 with neons and the back spoiler is for a GTR.

Put some gold forged BBS 18x10inch BBS's on it and take off the wing... and then keep it :D

Gold rims on a purple car?

I never intended to keep the rims, they were offered to me too cheap to refuse so i put them on intended to keep them only until i found something else i like then sell them for a profit, but i still havent found anything else that appeals to me & now thinkin of selling it i didnt see the point spending coin on new wheels. The wing i have no exscuse for tho .. i kinda like it, sorry :blush:

About $17K would be an OK buy from a buyers point of view.

Only because I know that I could probably make about $3K in selling the wheels, tvs, boot mounted nightclub and body kit.

which should be enough to have the car resprayed in a colour I would want with wheels I would preffer.

so in the end it would have cost me $17K to have a practical RB26 powered skyline with good mods.

I'm sure you would have spend over $15K more than that in getting the car where it is now..

and as you know, you will never get that back. not even close.

I have sold 3 skylines over the last 18months and the market for them os almost non existant nowdays. Absoloutly not intending to offend you but im telling you right now you will struggle to get $15K for that. Sell all the bolt on stuff seperate if you can be bothered and hope to get $12k for the car even with the RB26.

Only because I know that I could probably make about $3K in selling the wheels, tvs, boot mounted nightclub and body kit.

lol Club BOOT.. funny f**ker.. what time is it open till? admission costs?

yeah it's as gtst said.. you'll never get ur return.. nowhere near..

i spent over 35k on my VT making it something special and sold for not even half that.. funny part is you spend all this time doing it up.. when you finish is when you get bored of it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...