17" Work Xd9s & Greddy 6 Pot Brake Setup

[Roy]

Item: Work XD9 rims

Age: near new

Condition: Excellent

Price: $1650 with 2 near new tyres and 2 worn tyres (though still legal). $1500 without tyres. $1400 with the small scuff mark on front right wheel from the second morning i drove the car No wheel damage, just chipped the paint off and intending to get the paint fixed, even though because of the wheel colour its hard to see the chipped paint

To Fit: for my R32 GTSt, but will fit R32 GTR, R33 GTSt, etc etc

Location: Southbank Victoria

Contact: thread or PM

Comments:

Purchased these wheels because they were +30 offset rather then my old +35s and was hoping that they would clear the brakes i had laying in wait. Though, massively pissed off that even these wheels do not fit the brakes

So need to move this gear so i can afford to fix bodywork on car and either flare guards or go GTR guards so i can run +22 or +15 offset wheels to clear brakes i will buy further down the track as it appears as though the wheel offset for an R32 GTSt meansi cant run the Brembos, Greddy etc etc brakes that i have tried

Item: Greddy 6 pot brake setup

Age: New in packaging. One was unwrapped for trial fitting

Condition: New

Price: $3100

To Fit: S13/S14/S15/Z32, R32 GTSt/GTR. R33 GTS25T/GTR etc

Location: Southbank Victoria

Contact: thread or PM

Comments:

The kit is an S13/14 setup, so will fit both 4 stud and 5 stud cars. Kit is all brand new with lines, pads, rotors and of course calipers. Rotors are 330x30mm. I grabbed the S13/14 kit as i was hoping that the rotor would be more suitable to an R32 GTSt with regards to wheel clearances as Silvias run higer offsets then R32s (typically) . The only difference between this kit and the R32/R33 kits is the hats are drilled both 4 stud and 5 stud. Would make a good upgrade to even GTRs.

If you are going to use these brakes on your GTSt or Silvia then be warned. You need to be running a wheel with an offset of around +25 or less. Wheel designs vary and so will the offset required. My problem is i want to run a wide a wheel as possible for tyre and grip reasons, which means i cant go to a +24 offset like i used to with my old 17 x 7 AVS front rims.

Will consider trades on forged R32 GTR wheels that are 17x9.5 with offset in the range of +15 to +22

[Roy]

Wheels look to be sold with a guy getting money together and another in the wings.

Offer on the brakes was a little low, but open to reasonable offers. Nengun sell these for $2800 + delivery so ... make an offer.

[Roy]

I am off OS on the 11th and wont be back for a while, so will accept $2400 for the front Greddy brakes if the sale can be completed before Tuesday 5th August.

Will also accept $1200 for the wheels if payment made by Tuesday 5th August

[Roy]

Bump...

[Justa32]

man, love the rims... how much to get them shipped to wa?

[Roy]

My experience of shipping things to Perth is not goo (carton of magazines) I am guessing the wheels would cost about $200-250 as the total weight is about 42kg for all 4 wheels.

Will take some pretty colour pics of the brakes tonight. Considering i am willign to let them go for $500 less then you pay for Nengun, mroe like $800 when you factor in Nengun delivery...i thought they would sell quickly (lol...hoping they would )

Following are generic pics of the kit on the Greddy website

The kit is brand new still in all original boxes etc

[Roy]

The wheels cannot be sold until i get back from OS, but the brakes are all boxed up and ready for a buyer

[Roy]

Bump for brakes. Complete bolt on setup for Silvia and Skylines

[23NVY]

hey dude i know its been almost a year but are u still selling the Greddy brake kit?