Jump to content
SAU Community

146kmph In An 80 Zone Beaten In Qld Court

PEX

By PEX,
in General Automotive Discussion

 Share

Recommended Posts

PEX Newbie

PEX

Posted
Posted

Hi Folks

I am a moderator on aus300zx.com, I thought the members here would be interested in the developments on this thread on our forum

http://www.aus300zx.com/forum/showthread.php?t=278134

If it can assist anyone who legitimately wants to fight an alleged speeding offence, all well and good :D

Cheers

Greg

PEX Newbie

PEX

Posted
  • Author
Posted
gives us cliff notes. was he actually going that fast? if so, then why? if not why did the cops get a wrong reading?

No, he was not going that fast. There were 4 of us in the convoy.

You can't attack the reading or the officer, as all they have to do is produce certificates for the operator training and certification of accuracy for the device.

Despite the fact that you can still get a wrong reading, you just can't get anywhere in the court by using that reasoning.

This guy was targeted at 527 metres. Now, that's over 1/2 a kilometre (approximately 11 power poles in built up areas). They flew a LIDAR expert up from Victoria, and he himself admitted that the LIDAR beam diameter is wider and higher than the car at that distance.

The police office either lied or gave erroneous depictions of the days events like (no other traffic around), duh!! 4 Zs in convoy!! Plus the last day of a public holiday, the roads were packed. After giving evidence that no other cars were around, they played the tape of the day, and the magistrate says, "correct me if I'm wrong but that does sound like other cars are around".

Anyway, read through the thread on our site it'll all be there for your enjoyment.

In furtherance to your question regarding was he speeding, I can assure you that I would not have gone to all the trouble and expense (3 days off work) for a speedster.

Also, I doubt I'd get any support from our member-base if I was to publicly support illegal activities on our roads + I am in a position of responsibility within our organisation, so I have that aspect to consider also.

PEX Newbie

PEX

Posted
  • Author
Posted (edited)
change your pic in your sig imo.. it shows your number plate lol

haha too late.

Once you swear on the bible, the next thing is to repeat your full name and address, so they got me anyway.

I'll be looking over my shoulder for a while.

Lucky my 300 doesn't stand out too much from others :D

Edited by PEX
PEX Newbie

PEX

Posted
  • Author
Posted

No seriously, too many skylines on the road, we couldn't get over 60kmph :)

All jokes aside, I only posted here to help you guys, but I do appreciate your light-hearted banter :)

One day you'll all come up with something new and true about our cars.

When I bought the R33 to put alongside the Z, our members had nothing but praise.

PORTS Proficient

PORTS

Posted
Posted

Thanks for posting this info Greg, I believe that it is quite a significant case that Sean has won here and

that the ensuing result could possibly have far reaching ramifications for similar future or pending cases. :down:

4teecal Collaborator

4teecal

Posted
Posted
Thanks for posting this info Greg, I believe that it is quite a significant case that Sean has won here and

that the ensuing result could possibly have far reaching ramifications for similar future or pending cases. :down:

Moral of the story:

- speed measurement equipment is not always accurate

- cops will lie to cover their arse

I would suggest it will have not other consequences apart from this matter being dismissed.

The devices are accurate when used in accordance with the guidelines. This sounds like it was not done right in some respects.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...