Jump to content
SAU Community

Recommended Posts

Hi Folks

I am a moderator on aus300zx.com, I thought the members here would be interested in the developments on this thread on our forum

http://www.aus300zx.com/forum/showthread.php?t=278134

If it can assist anyone who legitimately wants to fight an alleged speeding offence, all well and good :D

Cheers

Greg

gives us cliff notes. was he actually going that fast? if so, then why? if not why did the cops get a wrong reading?

No, he was not going that fast. There were 4 of us in the convoy.

You can't attack the reading or the officer, as all they have to do is produce certificates for the operator training and certification of accuracy for the device.

Despite the fact that you can still get a wrong reading, you just can't get anywhere in the court by using that reasoning.

This guy was targeted at 527 metres. Now, that's over 1/2 a kilometre (approximately 11 power poles in built up areas). They flew a LIDAR expert up from Victoria, and he himself admitted that the LIDAR beam diameter is wider and higher than the car at that distance.

The police office either lied or gave erroneous depictions of the days events like (no other traffic around), duh!! 4 Zs in convoy!! Plus the last day of a public holiday, the roads were packed. After giving evidence that no other cars were around, they played the tape of the day, and the magistrate says, "correct me if I'm wrong but that does sound like other cars are around".

Anyway, read through the thread on our site it'll all be there for your enjoyment.

In furtherance to your question regarding was he speeding, I can assure you that I would not have gone to all the trouble and expense (3 days off work) for a speedster.

Also, I doubt I'd get any support from our member-base if I was to publicly support illegal activities on our roads + I am in a position of responsibility within our organisation, so I have that aspect to consider also.

change your pic in your sig imo.. it shows your number plate lol

haha too late.

Once you swear on the bible, the next thing is to repeat your full name and address, so they got me anyway.

I'll be looking over my shoulder for a while.

Lucky my 300 doesn't stand out too much from others :D

Edited by PEX

No seriously, too many skylines on the road, we couldn't get over 60kmph :)

All jokes aside, I only posted here to help you guys, but I do appreciate your light-hearted banter :)

One day you'll all come up with something new and true about our cars.

When I bought the R33 to put alongside the Z, our members had nothing but praise.

Thanks for posting this info Greg, I believe that it is quite a significant case that Sean has won here and

that the ensuing result could possibly have far reaching ramifications for similar future or pending cases. :down:

Thanks for posting this info Greg, I believe that it is quite a significant case that Sean has won here and

that the ensuing result could possibly have far reaching ramifications for similar future or pending cases. :down:

Moral of the story:

- speed measurement equipment is not always accurate

- cops will lie to cover their arse

I would suggest it will have not other consequences apart from this matter being dismissed.

The devices are accurate when used in accordance with the guidelines. This sounds like it was not done right in some respects.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...