Jump to content
SAU Community

Recommended Posts

Make:nissan skyline

Model:r32 gtr 1989

Milage:89xxxx on the stock speedo but does have 320k speedo with 9000kms

Transmission:manual

Colour:gunmetal grey

Location:bathurst nsw

Complied?yes

RWC supplied yes

Currently registered?long rego

Price:22k ono

Contact:0406589924

mods include:

garrett gt2860r -5 bb turbos

hks cam gears

120mm front mount

pfc handcontroller

600cc tomei injectors

1l surgetank with 044 main pump and r33 gtr lift pump

3 1/4 inch titanium cat back

stainless just jap split dumps

stainless front pipes 2.5 inch into 3inch

hks hypermax coilovers

os giken twin plate clutch

320km speedo

front strut brace

profec ebc (needs installing)

mines pods

the car is regod and running fine but as it does not have a tune yet i dont drive it hardly and never get on the gas hard.the should make 300kw with tune and more if afm are upgraded.ive had the car for 3yrs and have done all the mods as the car was bog stock when i purchased it.the car is in good condition but does a bit of a dint in the rear right guard which was there when i bought it also. the gtr has a brand new windscreen and rear tyres. the interior is in great condition but the reararm rest fabric needs re gluing nothing major i just havnt got round 2 it.no broken vents or rips in seats etc

it has kenwood cd player its nothing special as im not big on loud music.id rather the sweet sound of the rb26dett anyday.

before i bought the car i had the engine compression done and they read 147-150 through all six cylinders

also the front bumper is aftermarket and is fibreglass and isnt in real good shape.i was planning on getting stock one but just havnt found one yet. the one on it is still on there fine. any further questions just ring me anytime.

im also willing to trade for 3l turbo hilux dual cab or single cab,also will trade for landcruiser 4.2 diesel ute in good condition plus cash my way. if its a cheaper swap.

i dont wanna sell it but ive been getting into loads of pig hunting and working heaps so no time for it.its going to waste and my old landcruiser is on its way out and i need a new ute more than the gtr.the car nomlonger has these wheels it just has stock gtr wheels.sleeper look and now has rear wing also.

post-19779-1217049269_thumb.jpg

post-19779-1217049758_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/229730-r32-gtr-forsale/
Share on other sites

Make:nissan skyline

Model:r32 gtr 1989

Milage:89xxxx on the stock speedo but does have 320k speedo with 9000kms

Transmission:manual

Colour:gunmetal grey

Location:bathurst nsw

Complied?yes

RWC supplied yes

Currently registered?long rego

Price:22k ono

Contact:0406589924

mods include:

garrett gt2860r -5 bb turbos

hks cam gears

120mm front mount

pfc handcontroller

600cc tomei injectors

1l surgetank with 044 main pump and r33 gtr lift pump

3 1/4 inch titanium cat back

stainless just jap split dumps

stainless front pipes 2.5 inch into 3inch

hks hypermax coilovers

os giken twin plate clutch

320km speedo

front strut brace

profec ebc (needs installing)

mines pods

the car is regod and running fine but as it does not have a tune yet i dont drive it hardly and never get on the gas hard.the should make 300kw with tune and more if afm are upgraded.ive had the car for 3yrs and have done all the mods as the car was bog stock when i purchased it.the car is in good condition but does a bit of a dint in the rear right guard which was there when i bought it also. the gtr has a brand new windscreen and rear tyres. the interior is in great condition but the reararm rest fabric needs re gluing nothing major i just havnt got round 2 it.no broken vents or rips in seats etc

it has kenwood cd player its nothing special as im not big on loud music.id rather the sweet sound of the rb26dett anyday.

before i bought the car i had the engine compression done and they read 147-150 through all six cylinders

also the front bumper is aftermarket and is fibreglass and isnt in real good shape.i was planning on getting stock one but just havnt found one yet. the one on it is still on there fine. any further questions just ring me anytime.

im also willing to trade for 3l turbo hilux dual cab or single cab,also will trade for landcruiser 4.2 diesel ute in good condition plus cash my way. if its a cheaper swap.

i dont wanna sell it but ive been getting into loads of pig hunting and working heaps so no time for it.its going to waste and my old landcruiser is on its way out and i need a new ute more than the gtr.the car nomlonger has these wheels it just has stock gtr wheels.sleeper look and now has rear wing also.

post-19779-1217049269_thumb.jpg

post-19779-1217049758_thumb.jpg

what sort of money??

Link to comment
https://www.sau.com.au/forums/topic/229730-r32-gtr-forsale/#findComment-4038112
Share on other sites

thanks black widow.u could still come for look hehe

i mite get my cousin to come have a look...he's on here, he has an R34 GT-t so i mite get him to sus it out for me

btw Hayden Patinerre (or however the hell you spell her surname) is hot!!

Edited by Black Widow
Link to comment
https://www.sau.com.au/forums/topic/229730-r32-gtr-forsale/#findComment-4050154
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...