Jump to content
SAU Community

Recommended Posts

Start blinking really fast on one side as if a globe was blown?

I've checked all blinkers and all are working so my guess is its the flasher unit.

Every now and again it would blink fast on the right side, I would turn the blinker off and put it back on and it would blink at a normal pace.

Nissan want $100 for a newey.

An Aftermarket 300zx Z32 92' one from Motor Mates is $22.

I might find out if the flasher unit is the same...

If so thats a decent saving and I'd be a happy man.. :P

Joel.

Sounds like a dodgy connection on one of your blinkers to me. Pull all the bulbs out on that side and clean the connections and check all the plugs.

I had a blicker relay go on an old car (my old tough Stanza :P ), and over time the blinking got slower and slower and slower...... And it did it on both sides.

Cheers

J

thats the usual prob if it flashes quicker , globe gone or bad connection , if the unit is stuffed u would have the prob on either side so i would check all globes on that side and clean the connectors before i bought the new unit .

OK I checked all connections etc and they are all fine.

I poped down to Autobarn ripped out the old one and it looked the same as a R31 Skyline Flasher unit.

$30... All is good now..

Much better than the $100 Nissan wanted.

Second hand jap importers wanted $30.

The bloke said his flasher unit went in the same way on his old EH holden and come to think of it I have seen some old holdens flashing really quickly and all their blinkers appear like they are working.

Its been doing it every now and again for the past 2 years. It would dissapear for 6 months then come back then go then came back and stayed.

I plugged the old one back in to double check and yer the quick flashing was there still.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...