Jump to content
SAU Community

Recommended Posts

so i just picked up a HKS SSQV for my rb20 and it sounds average, put in the purple insert aswell...

so i only wanted the bov to get the flutter, but it doesnt only under boost and it sounds shiat, ive heard other turbos just go vvvvttttssshh ttttssshh ttttssshh, hence the flutter, and was wndering how to get that sound exactly?

ver noob question i know but how do i get this? no BOV, how do i block the bov port?

any help would be awesome or if yas can point me in the direction of a thread that has covered this, as i couldnt find it, even with 793 pages of tech questions not 1 would come up!!

Link to comment
https://www.sau.com.au/forums/topic/230194-bov-how-tos/
Share on other sites

Please search.

BOV's have been covered to death and associated 'e-noises'

Also how to blank off the BOV is also done extensively

Even as far as to go right down the the brands and the noises each make!!! All fully destribed over the internet. It makes for interesting reading thats for sure with gobble gobble, psssht, whoop whoop, PSSSHTTTTTTT - being commonly used terms in some threads

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/230194-bov-how-tos/#findComment-4044748
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...