Jump to content
SAU Community

Recommended Posts

Why when you can buy a razo one ! ?

I originally started out making stock ones cause my original one was worm out and when I priced a new one I was quoted nearly $700 ( Ive owned R33s for around 10 years now ) back then from a parts dealer ! ! ! And because of that I decided then to make one that wouldnt wear off the vyln/leather from every day use.

R33AzzA your pics didnt come up ? If I can get a look at the design and see how it works internally I willing to give it a go

Sorry, Hopefully these work. I don't have any internal pics as of yet.

post-43220-1219617192_thumb.jpg

post-43220-1219617297_thumb.jpg

post-43220-1219617386_thumb.jpg

  • 2 weeks later...
  • 1 month later...

What about the 6 speed version for the R34? the stock knob is nice but it's starting to wear in places and I want to keep it.

You could borrow mine for a mould but it's not in tip top shape anymore.

Goddamn, those are sexy - both the gearknobs on my nissans are looking kinda worse for wear, and I'd love to replace em - but trying to find something that looks nice and stock like the factory leather ones has proven extraordinarily difficult -- So what you have here looks f**king *awesome*

Are you planning on making / selling these?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...