Jump to content
SAU Community

Recommended Posts

Model:r32 gtr, 1989

Milage:2000 km since rebuild.

Transmission:manual

Colour:black

Location:melbourne

Complied?yes

RWC supplied?yes

Currently registered?yes

Price:$20,000

Contact:pm or 0401 631 325

Comments / Modifications:listed below

Images:below

Engine has been built by CHASERS MOTORSPORT, 265.9kw on safe tune for torque not outright horse power.

Suspesion built and tuned by TURTRACK SUSPENSION

Sad to see it go but i have too many toys and the GTR must leave to a better home, one where it will be driven more.

ENGINE:

r33 gtr crank

standard rods/pistons

N1 oil pump

N1 water pump

port matched inlet and exhaust

trust oil filter relocation and oil cooler

garret 2530 turbo's

xforce dump pipes

unknown front pipe

apexi exahust from cat back

metali hight flow cat

apexi pod filters

os giken twin plate clutch

spool cam gears

power fc computer

eboost boost controler

50mm alloy radiator

650cc injectors

040 fuel pump

SUSPENSION:

revalved bilsteins, height adjustable.

eibach race coils, 5kg front, 4 kg rear

tien caster rods

noltec front upper arms

hicas lock bar

drift project rear upper arms

front and rear sway bars, adjustable

pinapples

front and rear strut brace

BRAKES:

r33 front brembo's

front pagid blue pads

dba 5000 front rotors

nismo braided lines alround

project mu rear pads

dba 4000 rear rotors

brake master stopper

ABS REMOVED

WHEELS:

nismo lm gt4 17 by 9.5

falken azenis rt615 semi slick 255/17/40 alround

INTERIOR:

willans 4 point harness

4wd controller.

turbo timer

eboost 3 settings.

post-34794-1218252667_thumb.jpg

post-34794-1218252765_thumb.jpg

post-34794-1218252789_thumb.jpg

post-34794-1218252811_thumb.jpg

post-34794-1218252829_thumb.jpg

post-34794-1218252906_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/231619-r32-gtr-melbourne/
Share on other sites

for some reason pics wont work and i cant upload any, will get it sorted soon.

the car is on car sales if you want some pics.

carsales.com.au

LOL! were you meant to give the direct link to your ad or just a link to carsales homepage? :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...