EnricoPalazzo Posted August 23, 2003 Share Posted August 23, 2003 Hey guys. Well i installed my boost gauge and my Festo Pneumatics bleed Valve and headed off to Morpowa to get it tuned. Anyway the result was a very impressive 183rwkws at 11psi. The bleed valve was quite good, however there is a spike at around 3500rpm where it goes to 13psi. Anyway im very happy, it feels alot more responsive, But i think my clutch is now slipping Im not too sure. Now i need to heat wrap my front pipe and make my CAI partition, then A FMIC hehe. Mods are trust 3inch front pipe, Trust cat back 3.5 inch, HKS airfilter, HKS BOV, THats really it. Dyno printout to come later. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/ Share on other sites More sharing options...
Nissan_Envy Posted August 23, 2003 Share Posted August 23, 2003 Enrico, the is a threat somewhere here that has a bleed valve setup that is meant to elimanate boost spikes. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-497981 Share on other sites More sharing options...
Steve Posted August 24, 2003 Share Posted August 24, 2003 time to update your profile:p congrats again on a really good result. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-498506 Share on other sites More sharing options...
hippy Posted August 24, 2003 Share Posted August 24, 2003 still not as good as my stock stand automatic Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-498542 Share on other sites More sharing options...
strutto Posted August 24, 2003 Share Posted August 24, 2003 Well done Enrico... Excellent result! What sort of dyno do they have at Morpowa out of intrest? Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-498580 Share on other sites More sharing options...
EnricoPalazzo Posted August 24, 2003 Author Share Posted August 24, 2003 Dyno Dynamics. Thanks everyone. Ive been recently told the Dyno reads lower then others in SA (read TIlbrooks) so im happy about that. Cya Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-498723 Share on other sites More sharing options...
cobo_11 Posted August 24, 2003 Share Posted August 24, 2003 EnricoPalazzo: May I ask if you run your HKS BOV (SSQ??) with a stock ECU? If you do have a stock ECU and have a HKS SSQ BOV, how does your can run? ie: backfiring, lean/rich, etc? Cheers. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499250 Share on other sites More sharing options...
Cubes Posted August 24, 2003 Share Posted August 24, 2003 Another Freak R33 RB25DET like Buggalugs.. I think he made 200rwkw on Tilbrooks dyno with 11psi was it?!? Stock ECU, FMIC & Exhaust. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499436 Share on other sites More sharing options...
hippy Posted August 24, 2003 Share Posted August 24, 2003 i can answer that one cobo .. he was running the ssq bov and did have one of them hks idle stableizers but now i'm not so sure what he has since he fixed his afm problems ... and yeah i dont' think u've ever told me what u did to fix that problem u had dean? Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499442 Share on other sites More sharing options...
hippy Posted August 24, 2003 Share Posted August 24, 2003 joel ... i can also say that i've heard that tilbrooks reads much higher than alot of other dynos ... i've heard this from numerous amounts of people ... but its just a rumor so can't be 100 percent sure ... but definitely does not mean that tilbrooks dont' know what they're doing Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499443 Share on other sites More sharing options...
Cubes Posted August 24, 2003 Share Posted August 24, 2003 It is only marginal I think well it used to be unless things have changed since almost a year ago. Freebaggin made some where around 200rwkw on RPM's DD Dyno and he also made the same/very similiar on Tilbrooks Dyno. I've had mine on RPM's and made 115rwkw when it was dead stock on a cold day, I also had mine on D&T Performance Exhausts DD Dyno on a 34degree day and it made 113rwkw. Maybe its changed since then however. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499472 Share on other sites More sharing options...
EnricoPalazzo Posted August 25, 2003 Author Share Posted August 25, 2003 Hiep: Sorry matey, Ok the problem was with the AFM and the loom connection plug, and perhaps the ECU? Anyway i replaced the ECU, Straped taped the connection to it to ensure it was getting correct conductivity, and then took apart the AFM, resoldered something that looked like it was not connected, and it all worked. Now back to the thread. I think my clutch is slippin on boost in lower gears 2nd 3rd, but not under load in 4th gear. Isnt there more pressure on the clutch in a higher gear? So im confused, I think i need someone to come out and drive it. BOOSTD, are u free this week at all? Now i cant wait to get a FMIC and PowerFC, hahah with my imaginary money. Im so broke Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499582 Share on other sites More sharing options...
EnricoPalazzo Posted August 25, 2003 Author Share Posted August 25, 2003 Cobo: U have the HKS EIDS for sale. I no longer use it as it doesnt need it. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499593 Share on other sites More sharing options...
Steve Posted August 25, 2003 Share Posted August 25, 2003 Dean that clutch slip is probably the wheels not getting traction. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499662 Share on other sites More sharing options...
EnricoPalazzo Posted August 25, 2003 Author Share Posted August 25, 2003 Hahah nah there isnt that much power. Over 200 is what im aimin for. I think im goin for a BoostD Special Turbo when my FMIC and Powerfc are on haha!!! Can anyone recommend a good single plate clutch, Cheap! Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-499687 Share on other sites More sharing options...
Cubes Posted August 25, 2003 Share Posted August 25, 2003 The BoostD special is not a bad turbo.. I some times think its the clutch slipping in third however its the diff occasionally open wheeling slightly. Not all the time. It does it more so in first if anything as boost snaps hard. Some times axle tramps and goes sideways othertimes just openwheels slightly, goes no where and hits 7k. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-500050 Share on other sites More sharing options...
cobo_11 Posted August 25, 2003 Share Posted August 25, 2003 I've never owned a HKS EIDS....? Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-500309 Share on other sites More sharing options...
GILTY Posted August 25, 2003 Share Posted August 25, 2003 Clutch... See Just Jap in Sydney, exchange ceramic button (single plate) for around $550. Will hold plenty of pwr. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-500338 Share on other sites More sharing options...
Steve Posted August 25, 2003 Share Posted August 25, 2003 Dean if you buy a cheap clutch, you get a cheap clutch. I would strongly recommend you dont make the mistake I did, and buy your self a twin plate. Can be had for $1200 second hand in good cond ($3500new) and they just wont let you down. At the end of the day, you pay $550 for a single plate, then anoter couple of hundred for a pressure plate, then another $200+ plus to fit, then you pay another $1200 when the single shits itself, then another $200 to fit it a second time. I know its a bit dearer, but it is so much better, and will take all the punishment you can hand out. If I had gone the twin straight up I would have saved myself $900 - thats almost a power fc, or a GTR cooler with change:) If you are interested, pm me and I will see if I can get you a good deal on one second hand. Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-500399 Share on other sites More sharing options...
EnricoPalazzo Posted August 25, 2003 Author Share Posted August 25, 2003 Ahh those prices scare me haha. I have to get a second opinion. Maybe i can meet up with u so u can fang my car a bit, orelse BOOSTD can have the pleasure Link to comment https://www.sau.com.au/forums/topic/23245-dynoed-my-car-stock-ecu-intercooler-183rwks/#findComment-500502 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now