Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Do a couple of hard launch, then pull over. If you can smell something similar to brakes (assuming you didnt stand on the brakes:)) you probably got slipping clutch.

Basically the engine will be accellerating, but the cars accelleration will be very sedate by comparison. I remember when mine went, I would pull away gently and all would be ok, if I tried to give it too much stick, if felt (and was) alot slower even though the engine revved hard - if you know what I mean.

Another dead giveaway is smoke coming out the front of the car near the back of the front wheels after you have done your launches (well mine did anyway).

Mine slips when I slap third gear, however slapping second causes wheel spin until around 90-95kays where third is.

I've got one of those purple looking pressure plate ones that has 30% more pressure. Its not the best I must say, heats up to quickly and slips, even since day one.

I tell ya what... it must be scary doing 90-95km/h with the back end out of control, I hate it when just doing like 20-30km/h hehe.

Unless I drop the clutch from >1700rpm in 1st gear I can't break traction any other way (or gear). Can't wait to get rid of these 225's and throw on some 255's on the rear it'll be unreal.

Guest Robo's
Originally posted by Steve

Mine did with stock cooler, got a FMIC and it held boost all the way to redline.

Horsepowerinabox have a write up on the stock cooler saying it drops something in the range of 7psi at 6000+rpm, its on the cooler upgrade for R33 pages, worth a look.

If what they say is true, when you are reading 10psi at 7000rpm, your turbo is actually making 17psi as boost is measured at the plenum.  This is probably why its not a good idea to boost over 10psi (or try to) with a stock cooler;)

Is that an article in a book or a web page?

Guest Robo's
Originally posted by benm

I tell ya what... it must be scary doing 90-95km/h with the back end out of control, I hate it when just doing like 20-30km/h hehe.  

Unless I drop the clutch from >1700rpm in 1st gear I can't break traction any other way (or gear). Can't wait to get rid of these 225's and throw on some 255's on the rear it'll be unreal.

My thing spins at any speed in first gear, as soon as it hits boost it spins. Its due to my tyres. There 255/40/17 but they are hard as, tyres dont feel sticky at all. Need some new ones. Anyone got any cheap?

I've got the same core.

If I set boost above 13psi with the standard turbo I get boost drop with the ebc in manual mode. With the EBC in Auto it will hold boost all the way but it does waver slightly and makes slightly less boost in lower gears, nothing the a manual channel of scamble can't fix though.

With the bleeder I experienced exactly the same. I did notice that after fitting the fmic 3rd gear felt stronger and consistent where as with the stock IC after a few hard gears the heat soak must have set in and power would start to feel flat in the higher gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...